105AH LITHIUM LiFePO4 ENERBLOCK battery 12.8V with charge blockage <0 ° C
LITHIUM LiFePO4 ENERBLOCK battery 12.8V 105AH / JLFP12-105W
The ENERBLOCK LITHIUM LiFePO4 batteries of the JLFP series are the new generation of mobile energy sources. Lithium Iron Phosphate (LiFePO4) technology is the longer lasting and safest variant of Lithium Ion technology. The built-in BMS control system controls the charging and discharging process and protects the battery against overcharging (>15V), over-discharging (<10.5V) and overheating. Compared to "traditional" lead acid technology, including AGM and GEL, the ENERBLOCK LITHIUM batteries are significantly more resistant to deep and frequent discharges. The JLFP series has a life expectancy of 3500 cycles at 80% maximum discharge. These batteries have no memory effect and the state of partial and notorious discharges does not have a negative influence on their life. Unlike lead-acid technology, in LiFePO4 technology the expressed capacity of the battery does not decrease with increasing current consumption. Additional advantages include very low weight, low self-discharge, wide operating temperature range and the ability to quickly recharge the battery.
ENERBLOCK LITHIUM batteries are used in electrical appliances and vehicles. Both in industry and the hobby sector. They are ideal for marine applications such as yachts and fishing boats, where the low weight of the battery is a great convenience for the user.
Technical details:
- Weight: 12.5kg
- Voltage: 12,8V
- Capacity: 105AH
- Energy: 1344Wh
- Dimensions: L310mm x W171mm x H219mm
- Terminal: M8 thread
- Life: 3500 cycles of operation for DOD discharges up to 80%
- Maximum continuous current: 100A
- Maximum instantaneous current (<10s): 100A-300A
- Operating temperatures (discharge): -20C - +55C
- Operating temperatures (charging): - 0C - +50C
Advantages of LITHIUM LiFePO4 over AGM/GEL
- 3x less weight
- Significantly longer service life (3500 cycles)
- Greater efficiency (constant capacity regardless of current consumption)
- Fast charging possible (2-3 hours)
- Partial discharge has no negative effect on lifetime
The BMS system protects the battery against:
- overcharging (>15V)
- deep discharge (<10V)
- overheating
- reversed polarity
- PROTECTION AGAINST CHARGING AT NEGATIVE TEMPERATURES
LCD Display
A liquid crystal display (LCD) is built into the battery to indicate the state of charge of the battery.
- Percentage charge level indication
- Voltage value (V).
The display is not fully waterproof. Splashing with water may damage the display.
Application
- UPS uninterruptible power supply systems
- Yachts & boats
- Campers
- Telecommunication power plants
- Emergency lighting system
- Fire and alarm systems
- Photovoltaics, wind power plants
- Electric scooters, Wheelchairs
- Parking meters, CO pumps
- Medical equipment