Easy maintenance.
Sustainable. Ressource-efficient
With our lithium batteries we focus on consistent modular construction
LIONTRON® LiFePO4 battery is an adecuate lead battery replacement equipped with all advantages of lithium iron phosphate technology.
The highest level of safety and long usability are guaranteed, even with regular deep discharges. This technology enables a high cycle life, which makes this battery an ideal traction battery. The battery is suitable to replace lead batteries like AGM or gel one-to-one without having to adjust the charge-/discharge structure.
Due to the absolutely useable capacity it replaces lead-acid batteries with twice the capacity, despite the extremely light construction.
When considering the costs over the period of use, lithium batteries are less expensive than lead batteries.
Persistent deep discharging of more than 50 % is not recommended with lead batteries, because the amount of possible cycles is decreased disproportionately strong. In contrast to that a Lithium battery may be discharged up to 90% regularly without causing any troubles or altering the amount of cycles. Thus, a 100 Ah lithium battery can usually replace a 200 Ah lead batttery. Lead batteries decisively lose capacity after a maximum of 800 charging cycles. Contrary to this, a LiFePO4 Battery manages up to 3000 charging cycles putting on a convincing performance with the following 7000 cycles, too.
In conclusion, a LIONTRON® lithium battery persists at least as long as three lead batteries, even when used intensively. With regard to weight, lithium batteries should be the preferred choice in contrast to lead batteries.
A conventional 100Ah lead battery weighs about 32 kilograms. A lithium battery of the same capacity weighs a mere 14,5 kilogram. Thus, the weight reduction is more than 50%. If a 200Ah lead battery is replaced by a 100Ah lithium battery, the weight saving doubles again.
With our lithium batteries we focus on consistent modular construction
The casing is not glued shut and is easy to open for maintenance purposes. by simply releasing the screws. The individual modules like cells, battery management system (BMS) or bluetooth module are not soldered up, but screwed together. Hence, defective parts can be exchanged on demand without special tools. Functional units may remain unchanged. This helps to save ressources.
In order to allow a life cycle for our customers even after the warranty period, we have voluntarily committed to hold back spare parts for at least further 10 years. Through this, inexpensive repair works are still possible even after the expiry of the warranty period.
In contrast to other lithium technologies neither cobalt, nickel, cadmium, nor any other environmentally unfriendly heavy metals are used with the cell production. Especially when it comes to recycling the lithium iron phosphate technology scores compared to other material combinations. Every single metal can be recycled up to 100% and the environment doesn´t get harmed by toxic heavy metals.
The battery management system (BMS) which is integrated into every battery ensures protection against the wrong usage of the battery. It switches the battery off in the event of Undervoltage or overvoltage, for example, and automatically switches it on again as soon as the problem is resolved.
Through the integrated Bluetooth interface, the battery status can be monitored on-demand via smartphone or tablet(Android or Apple iOS). Laboriously wired battery monitors are no longer needed.