COPRIM ALFA C 00269 G 1/4 weld-on socket - external impulse line connection for ALFA gas regulators
ID produktu: 84408
- COPRIM C 00269 weld-on socket with G 1/4 female thread, welded into the pipe downstream of an ALFA regulator. Provides the external impulse line connection for ALFA MP, BP and AP 40/50 regulators. Installation by a qualified fitter only.
The COPRIM C 00269 weld-on socket with a G 1/4 female thread is used to make the external impulse line connection of an ALFA gas regulator directly on the pipeline. It is welded into the pipe downstream of the regulator (outlet side) and then connected with an impulse line to the impulse port of the regulator.
Use and installation
- external impulse line connection for ALFA MP and BP and ALFA AP 40/50 regulators without an integrated impulse line
- the socket is welded into the pipe downstream of the regulator
- a 1/4 inch fitting is screwed into the socket and the impulse line connected, in our range: Cu 10 mm copper impulse tube, 1 m
- after installation, leak-test all threaded and welded joints
- gas installation work must be carried out by a qualified fitter only
ALFA regulators in our range
Technical data
| Parameter | Value |
|---|---|
| Manufacturer | COPRIM |
| Manufacturer code | C 00269 |
| Type | weld-on socket |
| Thread | female G 1/4 |
| Use | external impulse line of ALFA MP, BP and AP 40/50 regulators |
| Installation point | pipe downstream of the regulator |
| Matching tube | Cu 10 mm |
Questions and answers
When is this socket needed?
When an ALFA regulator needs an external impulse line, i.e. the MP and BP versions and AP 40/50.
Where is it fitted?
It is welded into the pipe downstream of the regulator by a qualified fitter.
Manufacturer
COPRIM srl, Via Retrone 32, 36077 Altavilla Vicentina (VI), Italy.
Ask a question
Write your opinion