Enapter 38l Water Tank Module 2.1

Enapter 38l Water Tank Module 2.1 

Enapter´s Water Tank provides storage for 38 litres of clean water for the AEM electrolyser. The water tank is rack mountable into a standard 19” cabinet. The tank contains a conductivity sensor and a pump system to supply up to 11 AEM electrolysers with clean water. 

Specifications

• Capacity: 38 l
• Dimensions (W × D × H in mm): 483 × 640 × 310 mm
• Module weight (without water): 20 kg
• Module weight (with water): 59 kg
• Space inside cabinet: 7U
• Max outlet water flow rate: 3.8 l/min
• Output pressure: Up to 2.75 bar
• Water input conductivity requirement: < 20 μS/cm (at 25 °C)
• Water input pressure requirement: 0.5 – 6 bar
• Water inlet flow requirement: > 0.28 l/min
• Maximum power consumption: 35 W
• Stand-by power consumption: 3 W
• Standard power supply: AC 110-240 V, 50/60 Hz
• Ambient operative temperature range: 5 – 45 °C
• Ambient operative humidity range: 20 - 95% Rh
• Control and monitoring: Fully automatic with Enapter’s EMS (Energy Management System)
• Maintenance:
• If in use, the water tank is maintenance-free.
• After any period without use exceeding 1 month,
• the tank must be drained and washed before continuing usage.
• Recommended number of AEM electrolysers to be supplied: Up to 11