Fiamma Rail Quick Pro 128 cm bike rail - aluminium with black end caps, for Carry-Bike racks
- Fiamma Rail Quick Pro 128 cm bike rail in anodised aluminium, with a double-bottom profile and two sliding Quick-Safe straps. Fit it to a Carry-Bike rack as a rail for an extra bike or as a replacement for a worn rail.
The Fiamma Rail Quick Pro is a 128 cm bike rail that holds the wheels of a bike on a Fiamma Carry-Bike rack. It has a reinforced double-bottom profile and two sliding Quick-Safe straps for the wheels. The same rail comes as standard on most Carry-Bike racks, so it is bought as a rail for a third or fourth bike or as a replacement for a damaged rail.
Key facts
- manufacturer: Fiamma, model Rail Quick Pro, part number 98656-993
- length 128 cm (1280 mm)
- anodised aluminium, black end caps
- reinforced double-bottom profile
- 2 sliding Quick-Safe straps included
- pre-drilled holes in the base
- weight 1.0 kg according to the manufacturer
- interchangeable with the previous Rail Quick version
What it is for
The rail is the basic part of a Carry-Bike rack. The bike stands in it on both wheels, and the Quick-Safe straps hold the wheels in place. The bike frame is secured separately to the rack frame with a Bike-Block Pro holder.
An extra rail is useful in two cases: when the rack comes with two rails but the model can carry more bikes, and when the original rail is cracked, bent or has worn straps. The manufacturer provides for fitting the rail as a third rail and as a fourth rail, both with a third rail already installed and without it.
Dimensions and design
- overall length 128 cm, the standard length for Carry-Bike rack rails
- double-bottom profile, stiffer than a single sheet
- the Quick-Safe straps slide along the rail, so you can set them to the wheelbase of your bike
- black end caps close both ends of the profile
- according to the manufacturer, rails of this type fit most wheel diameters on the market
Fitting to the rack
- the rail is bolted to the rack cross bars through the holes pre-drilled in its base
- the fixing parts are included, and the manufacturer instructions show each step
- the instructions have separate drawings for a third rail and for a fourth rail, with and without a third rail
- before fitting, check that no part has been damaged or bent in transport
- check in the instructions for your rack how many bikes it may carry and what its maximum load is
Each additional bike also needs its own Bike-Block Pro frame holder. The holder version (arm length) depends on the bike position on the rack, as given in the instructions for your Carry-Bike model.
Everyday use
- put the bike in the rail, set the straps at the wheels and fasten them
- secure the bike frame with the Bike-Block Pro holder
- after a few kilometres, check the strap tension and tighten if needed
- before each trip, look over the straps and end caps and replace any damaged ones
Versions and compatibility
The Rail Quick Pro is interchangeable with the previous Rail Quick model, so it also fits older Carry-Bike racks that came with Rail Quick rails.
Fiamma makes this rail in several colours. This listing is for the anodised aluminium version (silver) with black end caps. If your rack has black rails, choose the Deep Black version listed under related products.
According to the manufacturer, with the optional Kit Premium S the rail can be converted so that the wheel holders also slide front to back.
What is included
- Rail Quick Pro rail, 128 cm
- 2 Quick-Safe straps
- fixing parts
- installation and usage instructions
Related products
- Fiamma Rail Quick Pro 128 cm bike rail, black - the same rail in Deep Black
- Fiamma Rail Quick 128 Red rail - previous rail model, interchangeable with the Rail Quick Pro
- Rail Quick Pro rail cover - spare cover for this rail
- Fiamma Carry-Bike VW T3 (T25) - tailgate rack, expandable to 3 bikes
- Fiamma Carry-Bike Pro bike rack - rack for the rear wall of a motorhome
- Fiamma Carry-Bike Pro C L80 bike rack - Pro C version of the rear wall rack
- Fiamma Bike-Block Pro S 2 Deep Black - frame holder for an extra bike
- Fiamma Bike-Block Pro 4 bike holder - frame holder for older racks
- Fiamma warning sign - sign for a load projecting at the rear of the vehicle
Technical data
| Parameter | Value |
|---|---|
| Brand | Fiamma |
| Model | Rail Quick Pro |
| Manufacturer part number | 98656-993 |
| EAN | 8004815353766 |
| Type | bike rack rail |
| Length | 128 cm (1280 mm) |
| Material | anodised aluminium |
| Colour | silver, black end caps |
| Design | reinforced double-bottom profile |
| Wheel fixing | 2 sliding Quick-Safe straps |
| Fitting | pre-drilled holes in the rail base |
| Weight | 1.0 kg |
| Fits | Fiamma Carry-Bike racks |
| Interchangeable with | Fiamma Rail Quick |
| Option | front-to-back sliding with Kit Premium S |
Questions and answers
Will this rail fit my Carry-Bike rack?
The Rail Quick Pro comes as standard on most Carry-Bike racks and replaces the older Rail Quick. Check the instructions for your rack to see how many bikes it may carry.
What else do I need to carry a third bike?
Besides the rail, you need a Bike-Block Pro frame holder in the version intended for that bike position. The rack must also be approved for three bikes.
Are the straps included?
Yes. The rail has two sliding Quick-Safe straps, and the fixing parts and instructions are included too.
Do I need to drill the rack?
The rail has factory pre-drilled holes in its base. It is bolted to the rack cross bars with the included parts, following the instructions.
Can I fit it next to old Rail Quick rails?
Yes. The Rail Quick Pro is interchangeable with the previous Rail Quick model, so both rails can be used on one rack.
Manufacturer
Fiamma S.p.A., Via San Rocco 56, 21010 Cardano al Campo (VA), Italy.