1x 30 litre photovoltaic hybrid boiler
1x check and pressure relief valve
1x User manual
Hybrid Photovoltaische Boiler 30 l Fothermo
ID produktu: 52337
30 l Photovoltaic Hybrid Water Heater
The photovoltaic hybrid boiler generates hot water primarily from electricity or hot water
directly connected photovoltaic modules. This saves around 75% of the electricity costs compared to one
classic electric boiler. A second heating element with 1,500 W output can optionally be installed in dark areas
and cloudy days, the water can be reheated using 230 V mains power.
This ensures that there is always
sufficient hot water is available. The photovoltaic hybrid boiler therefore replaces one 1:1
classic electric boiler.
The photovoltaic boiler reduces the electricity consumption from the grid by around 500 kWh to 800 kWh per year. The ma-
The boiler's maximum water temperature is 65°C. The photovoltaic modules are connected directly to the MC4
The boiler's photovoltaic plug is plugged in. No electrician is responsible for commissioning the photovoltaic system.
modules are necessary because the entire system works in protective extra-low voltage.
Especially in summer
Every six months, excess photovoltaic electricity can be fed directly into the power grid via a 600 W / 800 W micro PV inverter. This also reduces electricity costs.
scope of delivery
Examples of possible arrangements
Set 1: 30 litre hybrid boiler
The photovoltaic modules are connected directly to the hybrid boiler. If you have more or less installation space for the photovoltaic modules, you can vary the number of modules.
If you connect more than one photovoltaic module, you will need the 2-way, 3-way or 4-way parallel connector. This allows you to easily connect several photovoltaic modules in parallel.
An extension cable bridges the distance between the photovoltaic modules and the boiler.
We recommend the following products:
- 1x fothermo 30 litre hybrid boiler
- 2x photovoltaic modules
- 1x 2-way parallel connector
- 2x 10m extension cable (from the photovoltaic modules to the boiler)
Configure your own hot water supply or use our pre-assembled set.
Set 2: 30 litre hybrid boiler with surplus feed
You primarily prepare your hot water using photovoltaics. If there is excess photovoltaic power, this energy is simply fed into a micro PV inverter. This allows you to use excess energy to reduce electricity costs.
Configure your own hot water supply with surplus feed-in. We recommend the following products:
- 1x fothermo 30 litre hybrid boiler
- 4x photovoltaic modules
- 2x 10m extension cable (switching device to the boiler)
- 4x 5m extension cables (from the photovoltaic modules to the switching device)
- 1x fothermo switching device
- 1x Micro PV inverter
Configure your own hot water supply with surplus feed or use our pre-assembled set.
Technical data
- Dimensions (length, width, height) [cm]: 40x40x60
- Combined check and pressure valve: ✓
- Corrosion protection: ✓
- Enamel coating: ✓
- izolacja: ✓
- Pressure-tight: ✓
- Regulowany zakres temperatury wody [C°]: 10 - 65
- Product model: PVB-30-AC
- Nominal pressure [MPa]: 0.7
- Klasa IP: 24
- Waga (± 3%) [kg]: 15
- Water connection type: G½ (M)
- Integrated reverse polarity protection: ✓
- Digital display: ✓
- Certyfikat CE: ✓
- Maksymalna moc grzewcza fotowoltaiki [W]: 550
- Maksymalna temperatura wody [°C]: 65
- Zintegrowany tracker MPP: ✓
- Zalecana moc fotowoltaiczna [Wp]: 300 – 600
- Maximum connectable PV power [Wp]: 2000
- Max. open-circuit voltage [Voc]: 42.4
- Photovoltaic connector: MC4
- Heating power depending on currently available PV power 200 W [°C / h]: 6
- Heating power depending on currently available PV power 400 W [°C / h]: 12
- Heating power depending on currently available PV power 550 W [°C / h]: 16
- Heating power depending on currently available PV power 1500 W [°C / h]: 43
ID produktu
52337
Brand
Product length in centimeters
60
Product width in centimeters
40
Product height in centimeters
40
Heating power
1500 W
Capacity
29 l
Ask a question
Write your opinion







