Lagun table leg system black, 700 mm leg, 400 mm arm - 360° swivel, height adjustable, wall mounting plate, anodised aluminium
- Lagun table leg system, black, 700 mm leg, 400 mm arm, 360° swivel, stepless height adjustment, wall plate 170 x 91 mm. Anodised aluminium, tops up to 850 x 550 mm (separate).
The Lagun table leg system in black with a 700 mm leg and 400 mm arm turns any table top into a table you can swivel, raise, lower or remove in one move. The Lagun table system has been used for more than 40 years on boats and in motorhomes, caravans and camper van conversions. The set includes a wall mounting plate, a table top mounting plate and the fitting parts.
A table that disappears when you do not need it
The Lagun frame is fixed to a wall or the side of a cabinet with a wall mounting plate. The leg slides into the plate, and the arm and table top mounting plate turn through 360°, so the top can sit at the seat, swing aside or turn towards the window for work. When the table is not needed, arm and leg come off without tools and go into a locker. The longer 700 mm leg brings the top to a comfortable height even when the wall plate can only be fitted low down near the floor, which is common in boats and camper vans.
- Motorhomes, camper vans and caravans
- Boats and yachts, including the cockpit
- Van conversions and tiny houses
- Dining table, desk or extra worktop
Height adjustment and 360° swivel
Height is adjusted steplessly by sliding the arm along the leg, and the position is locked with PP levers operated by hand, no spanner needed. Arm sleeves made of glass fibre reinforced plastic keep the movement steady. According to the manufacturer the frame carries table tops of up to 850 x 550 mm. The table top is not included and is available separately.
- Stepless height adjustment
- Arm and table top plate turn through 360°
- Tool-free locking levers
- Table tops up to 850 x 550 mm
Seawater resistant aluminium
All load-bearing parts are made of anodised aluminium that copes well with moisture and salt water, so the frame works in a motorhome as well as on a boat. This version is black anodised aluminium (carbon black). The standard wall plate 170 x 91 x 13 mm spreads the load over a larger area of the wall.
What is included
The set comes pre-assembled.
- black swivel arm 400 mm
- black table leg 700 mm
- wall mounting plate 170 x 91 mm, black
- table top mounting plate, black
- set of mounting screws
- 3 black locking levers
- 2 plastic levelling wedges for uneven walls
- aluminium backing plate
Key data at a glance
| Feature | Value |
|---|---|
| Brand | Lagun |
| Type | table leg system with swivel arm |
| Colour | black |
| Material | anodised aluminium, seawater resistant |
| Leg length | 700 mm |
| Arm length | 400 mm |
| Wall mounting plate | standard wall mounting plate 170 x 91 x 13 mm |
| Rotation | 360°, arm and table top plate |
| Maximum table top | up to 850 x 550 mm (top sold separately) |
| Leg profile | 45 mm deep, 40 mm wide with screw head, 98 mm with lever |
Questions and answers
Can the table stay fitted while driving?
No. The manufacturer says the arm with the table top must always be removed while driving. The leg can stay in the wall plate. Vibration on the road causes friction that damages the joint between arm and leg over time.
Is a table top included?
No. The set contains the frame with a table top mounting plate to which you screw any top of up to 850 x 550 mm.
Can the table be moved to another place?
Yes. Fit an additional Lagun wall plate in a second spot, for example in the boat cockpit or by the sliding door of a van, and move the frame across.
What if the wall is sloping or thin?
The levelling wedges bring the plate upright on a sloping wall, and the aluminium backing plate fitted behind the wall spreads the screw load on a thin wall or cabinet side.