Moog Protective Bellows for KNOTT KF13-27 with Screw Cover, ø 53/63 mm x 135 mm - Overrun Coupling Shaft Boot
- Moog bellows for KNOTT KF13-27 with screw cover, ø 53/63 mm x 135 mm. Protects the overrun coupling shaft from water, sand and salt.
The Moog bellows for KNOTT KF13-27 is a rubber boot for the overrun coupling shaft. It covers the gap between the housing and the shaft with the coupling head, keeping water, sand and road salt out of the guides and bushes. Size: ø 53/63 mm x 135 mm. The version with screw cover also covers the fixing screw at the front of the housing.

Why the bellows matters
The overrun coupling shaft slides in and out of the housing every time you brake. If the bellows is cracked, dirt and water get inside. The bushes wear faster, the shaft corrodes and the overrun brake starts to work stiffly or with a delay. A new bellows is cheap protection against a much more expensive repair.
- protects the shaft and bushes from water and dirt
- prevents corrosion of the guide
- flexible weather-resistant rubber
- worth replacing during brake servicing

Fitment
The bellows diameters are 53 mm and 63 mm: one grips the shaft at the coupling head, the other the overrun coupling housing. Measure both diameters of the old bellows and compare the number of folds. Before ordering, compare the type of overrun coupling, axle or brake with the type plate and with the part you are replacing.
Replacement
Replacement usually requires removing the coupling head from the shaft. Take off the old bellows, clean the shaft, check the bushes and lightly grease the guide. Slide on the new bellows so that both ends sit tightly and secure them with clips if needed. Brake and overrun parts have a direct effect on driving safety. If you have no experience repairing trailers, leave fitting and adjustment to a workshop. After any repair, check the brake on a short test drive.
Key data at a glance
| Feature | Value |
|---|---|
| Brand | Moog |
| Type | overrun coupling shaft bellows |
| Fits | KNOTT KF13-27 |
| Dimensions | ø 53/63 mm x 135 mm |
| Note | with screw cover |
| Colour | black |
| Weight | 140 g |
Questions and answers
How do I choose the bellows?
By coupling type and diameters. This one is 53 and 63 mm.
Is a cracked bellows a problem?
Yes. Water and dirt damage the bushes and shaft, and the overrun brake starts to work worse.
Does the coupling head have to come off?
Usually yes, the bellows slides onto the shaft from the front.








