Moog Weld-On Plate for Wheel Shock Absorber, Straight - Shock Absorber Mount for Trailer Axles
- Moog steel weld-on plate, straight version. Creates a durable mounting point for a wheel shock absorber on the trailer chassis or axle.
The Moog weld-on plate in the straight version provides a fixed mounting point for a wheel shock absorber on the trailer chassis or axle. It is made of steel and transfers the forces from the shock absorber into the structure.

What it is for
If a trailer has no factory shock absorber brackets, they have to be added. A weld-on plate is the most durable solution: once welded, it becomes one piece with the chassis or axle, and the shock absorber is bolted to its hole.

Straight or bent
The straight plate suits places where the mounting surface is flat. The bent version lets you set the shock absorber eye at an angle or clear an obstacle on the chassis.
Fitting
Welding on the chassis and axle requires experience: on galvanised sections the zinc must be removed and the weld protected against corrosion. Never weld near the rubber axle elements, cables and bearings without shielding them. For axles under manufacturer warranty, check whether welding is permitted or choose a bolt-on bracket. Brake and overrun parts have a direct effect on driving safety. If you have no experience repairing trailers, leave fitting and adjustment to a workshop. After any repair, check the brake on a short test drive.
Key data at a glance
| Feature | Value |
|---|---|
| Brand | Moog |
| Type | weld-on plate for shock absorber |
| Material | steel |
| Colour | black |
| Use | trailer wheel shock absorbers |
Questions and answers
How many plates do I need?
One per shock absorber, so usually two per axle.
Can it be fitted without welding?
This plate needs welding. Without welding, use a bolt-on or plug-on bracket.








