Remis REMIfront IV pleated side window blinds for Fiat Ducato X250 (07/2006-04/2014), light grey
- Remis REMIfront IV pleated blinds for the cab side windows of a Fiat Ducato X250 built 07/2006-04/2014, in light grey. They are fitted in the door frame and a magnetic catch holds them shut.
Remis REMIfront IV is a cab blackout system for motorhomes built on the Fiat Ducato X250. This listing covers the side parts: pleated blinds for the windows in the driver and passenger doors, in light grey. The blinds come pre-assembled in frames that are screwed into the door frame, so there is nothing to put together from loose parts. When closed, the pleated blind covers the window and keeps people from looking in, and the multi-layer material reduces heat build-up in the sun and cooling at night. Folded away, the blind sits in a slim frame that looks like part of the vehicle interior. This way the cab can become part of the living area when you are parked. For a fully darkened cab you also need the REMIfront IV front blind for the windscreen, listed under related products.
Key features
- pleated blinds for the driver and passenger door windows of the Ducato X250
- light grey, matched to a grey cab interior
- pre-assembled in frames, fitted in the door frame
- blind guided by rods and guide profiles
- magnetic catch when closed, latch in the frame when open
- multi-layer, almost opaque pleated material
- ventilation openings stay clear
- maintenance-free system
How the side blinds work
- Closing: press the handle and pull it slightly to release it from the rest position, then slide the blind to the stop strip. The magnetic catch closes by itself.
- Opening: slide the handle back to the frame and press it until it latches into the frame.
- Before driving, check that the blinds on both sides are folded and locked.
- Only close the blind when the vehicle is parked and the engine is off.
Vehicle fit
The blinds fit the Fiat Ducato X250 built 07/2006-04/2014 and motorhomes on this base. The manufacturer states that the REMIfront IV system for the Ducato also fits vehicles of identical construction, meaning the Peugeot Boxer and Citroën Jumper. Light grey matches a grey cab interior. In the manufacturer catalogue the grey version is assigned to the Ducato X250 from 2006-2011, while the beige version is meant for vehicles with a beige interior from 09/2011-2014. Check the colour of the door trims before you order.
When the system does not fit
- vehicles with airbags in the A-pillars or above the doors
- vehicles with a rain sensor or light sensor at the interior mirror
- Ducato with a storage compartment above the windscreen (under the headliner)
- vehicles with equipment packages other than those listed by the manufacturer
Fitting in the doors
The manufacturer recommends fitting by a workshop. The blind frame goes into the door frame and is screwed to it. First the sheet metal holder with adhesive tape is placed on the upper frame adapter and stuck to the door. The holder position is pre-drilled with a 2.5 mm drill and fixed with a 3.5 x 13 mm screw. Then the blind is slid into the holder from above, the mounting domes are pressed into their seats and the clips into the door slots. The upper corner of the frame is pressed down into the armrest and fixed with a 3.9 x 13 mm self-drilling screw, and the hole is closed with the cover from the kit. The manufacturer instructions show each step with photos.
Points to note in use
- In strong sunlight the handles can get very hot.
- The system is not meant for darkening the vehicle over a long period, for example during winter storage.
- Depending on the temperature, the blind may temporarily fold back less easily.
Cleaning
Do not use aggressive cleaners, solvents or abrasives. Wipe the frames with a damp cloth and mild soapy water. Clean the pleated fabric with a soft brush or, if needed, carefully with a damp cloth. The system is maintenance-free.
Related products
- REMIfront IV front blind for Fiat Ducato X250, light grey - windscreen part in the same colour
- REMIfront IV front blind for Fiat Ducato X250, beige - front part for a beige interior
- REMIfront IV side blinds for Fiat Ducato, beige - the same side blinds in beige
- Sheet metal holder for Fiat Ducato for REMIfront IV - spare part for mounting the side blind
- Cover cap with Remis logo, light grey - spare part for REMIfront IV
- Accessories bag for REMIfront IV - add-on for the REMIfront IV system
- Remis REMIcare Van pleated fly screen for Fiat Ducato - for the Ducato X250/X290 sliding door
Technical data
| Feature | Value |
|---|---|
| Brand | Remis |
| System | REMIfront IV |
| Part | side parts (blinds for driver and passenger door windows) |
| Vehicle | Fiat Ducato X250 and motorhomes on this base |
| Years of manufacture | 07/2006-04/2014 |
| Colour | light grey |
| Blind type | multi-layer pleated blind, almost opaque |
| Closure | magnetic catch |
| Fitting | in the door frame, screws and sheet metal holder |
| Net weight | 4.4 kg |
| Package dimensions | 90 x 80 x 27 cm |
Questions and answers
Does this listing cover both sides?
Yes, these are the REMIfront IV side parts for the driver and passenger door windows.
Do the blinds cover the windscreen?
No. For the windscreen you need the REMIfront IV front blind. The light grey and beige versions are listed under related products.
Do they fit the Ducato X290 from 2014?
This version is described for the Ducato X250 built 07/2006-04/2014. For newer vehicles, check the separate REMIfront IV listings.
Can I drive with the blinds closed?
No. Only close the blind when parked with the engine off, and fold and lock it on both sides before driving.
How do I choose the colour?
Pick the colour that matches your cab interior. Light grey suits a grey interior, and there is a beige version for a beige one.
Manufacturer
REMIS GmbH, Mathias-Brüggen-Straße 67-69, 50829 Köln, Germany.