Tripus wheel chock holder black 135013 - TÜV Keilhalterung for camper and trailer

Tripus 135013 is a black wheel chock holder (Keilhalterung). The one-piece plastic design is TÜV-tested and keeps an original Tripus chock secure in a trailer, motorhome or van. The chock no longer rattles loose in the boot and stays ready for parking. Holder size is 167 x 20 x 95 mm (W x H x D), net weight 39 g. The pack contains 1 holder - the chock itself is not included.

Key features

• genuine Tripus holder, shop code 135013
• EAN 4250318280083
• colour black
• one-piece plastic construction
• TÜV-tested
• dimensions 167 x 20 x 95 mm
• net weight 39 g (gross about 40 g)
• made for Tripus wheel chocks
• 1 holder in the pack, no chock

What it is for

You fit the holder in the vehicle or on the trailer so the wheel chock has a fixed place. After manoeuvring you slide the chock into the holder and drive on without loose gear in the storage bay.

It suits caravans, cargo trailers, motorhomes and campervans. Under §41 StVZO, trailers over 750 kg need two chocks - holders help keep them tidy and ready.

This is not a wheel chock. Axle load and wheel blocking come from the Tripus chock itself (for example 135001 black or 135002 white). The holder only stores it.

Fitting notes

1. Choose a flat, load-bearing surface: locker wall, boot panel, furniture frame or gas-locker side - not thin cladding alone.
2. Hold the bracket in place and mark the fixing holes. Keep the chock reachable when you stop.
3. Fix with screws matched to the substrate. Tighten evenly without cracking the plastic.
4. Slide a Tripus chock into the holder and check it stays put during a short test drive.
5. Do not use the holder as a step or a handle to stand up. It is only for storing the chock.

Scope of delivery and size

• 1 x Tripus holder black (code 135013).
• Dimensions: 167 x 20 x 95 mm (width x height x depth).
• Net weight: 39 g; shop gross weight: 40 g.
• Wheel chock not included.

Black or white, holder or chock

This card is the black 135013. The white twin is 135014 (product 36087). Order the Tripus chock separately: black 135001 (35941) or white 135002 (35942). Match holder colour to your furniture; load rating and wheel blocking come from the chock, not the holder. Do not confuse this one-piece snap holder 167 x 20 x 95 mm with the separate bail-style mount.

Safe use

• The holder does not replace the chock and does not carry axle load.
• Mount only on a load-bearing surface; a loose holder can drop the chock on the road.
• After each use make sure the chock is fully seated.
• Do not exceed the Tripus chock rating (typical PE model: up to 1600 kg axle / 800 kg per wheel as on the chock card).
• Before driving, check that chock and holder clear moving parts, cables and service openings.

Care

Wipe the holder with a damp cloth and mild cleaner. Remove sand and mud before inserting the chock. Avoid aggressive solvents and sharp tools. Recheck screw tightness after vibration on long trips.

Related products

• Tripus wheel chock black 135001 - TÜV wheel chock for trailers, up to 1600 kg axle load
• Tripus wheel chock white 135002 - same chock in white
• Tripus wheel chock holder white 135014 - same holder in white

Technical data

Manufacturer

Tripus systems GmbH, Leitenweg 7, 89312 Günzburg, Germany. E-mail: sales@tripus.com.