UHPLAST transport tank P-120 120 l white - for vehicle installation
- The UHPLAST P-120 tank has a nominal capacity of 120 l and a white colour. It is intended for liquid transport according to the manufacturer instructions.
UHPLAST transport tank P-120 120 l white - for vehicle installation is a polyethylene tank with a nominal capacity of 120 l. Colour: white.
Construction and application
Model P-120 is a rectangular transport tank. It has a screw lid with a gasket. Before installation, check the available space and how the tank is supported and secured.
- Model: P-120.
- Nominal capacity: 120 l.
- Material: Polyethylene.
- Colour: White.
Selection and use
Install the tank on a flat surface with sufficient load capacity for the filled container. It is not intended for underground installation or pressurised operation. Load and unload it only when empty.
The exact model page requires liquid volume during transport to be 5% below nominal capacity. Empty tanks may be stacked; this does not permit stacking filled tanks.
The instructions require the lid facing upwards, securing against movement and a speed not exceeding 60 km/h. Select the transported medium according to intended use and material resistance; do not assume compatibility with any liquid.
Key data at a glance
| Brand | UHPLAST |
|---|---|
| Model | P-120 |
| Nominal capacity | 120 l |
| Material | Polyethylene |
| Colour | White |
| Wall thickness | 3.5 mm |
| Nominal filling opening diameter | 11 cm |
| Length x width x height | 115 x 40 x 28 cm |
Questions and answers
What are the key data?
Model: P-120; Nominal capacity: 120 l; Material: Polyethylene.
What is the product intended for?
Model P-120 is a rectangular transport tank. It has a screw lid with a gasket. Before installation, check the available space and how the tank is supported and secured.
What should be checked before use?
Install the tank on a flat surface with sufficient load capacity for the filled container. It is not intended for underground installation or pressurised operation. Load and unload it only when empty.