Water Purification System 2.1
Water Purification System 2.1
Water Purification System 2.1: Enapter electrolysers are highly resilient to water input and can be fed with purified rainwater or tap water. A simple reverse osmosis processes with resin filters can provide the required water quality. The water input to the electrolyser needs to be desalinated and have a conductivity of < 20 μS/cm.
Specifications
- Input water: Drinking water or Tap water
- Output water conductance: < 5 μS
- Operative power consumption: 200 W (Standby < 3 W)
- Standard power supply: 230 V / 50 Hz
- Clean water production rate: 2 l/min = 120 l/h
- Operating pressure water system: 1,5 bar … 4,0 bar
- Water temperature: +5 °C ... +30 °C
- Environment operating temperature: +5 °C ... +40 °C
- Weight (empty): 17,7 kg
- Filtering system: Reverse osmosis system is an osmotic module for the removal of dissolved salts and other possible pollutants present ion exchange resins bottle including:
- - Pre filter module:
- Capacity approx.: 8000 l
- - Fine filter module
- Capacity approx.: 1500 l
- Water storage tank: 2 l
- Maintenance: Maintenance intervals dependent on water input quality. Approximated values mentioned above
- Place of installation: Can be delivered preinstalled inside a cabinet on request.
- Recommended max number of AEM electrolysers that can be supplied with WPS: Maximum 5 Electrolysers
Symbol
H2003
Ask a question
Write your opinion