FAP Magic Service Hatch Lock with New System Cylinder and Keys, Black, 105 x 85 mm - Latch Lock for Motorhome Lockers and Garage Flaps
- FAP Magic lock for motorhome service hatches, lockers and garage flaps: latch, New System cylinder and keys. Outer part 105 x 85 mm, inner part 120 x 55 mm, hole spacing 65 x 40 mm.
The FAP Magic lock is a complete latch lock for service hatches, external lockers and garage flaps on motorhomes and caravans. The set consists of an outer part with a recessed handle and a New System cylinder, an inner part with the latch, and keys. The outer part measures 105 x 85 mm, the inner part 120 x 55 mm, and the mounting holes are spaced 65 x 40 mm apart. The flap latches by itself when you push it shut, and the key locks it against opening.
What the set includes
This is a complete set for replacing the whole lock, not just the barrel. The outer part has an oval black housing with a recessed handle in silver grey. The lock cylinder sits next to the handle. The set includes keys for this cylinder.
- outer part with handle, 105 x 85 mm
- New System cylinder
- inner part with latch, 120 x 55 mm
- keys for the cylinder
Outer part dimensions
The outer part is 105 mm wide and 85 mm high. Before ordering, measure your old lock and its screw spacing. If the dimensions and the 65 x 40 mm hole spacing match, the new lock fits into the existing cut-out without extra work on the flap.
Inner part with latch
The inner part, 120 x 55 mm, is mounted from the locker side. It is fastened from the inside with four screws. At its end there is a moving latch that snaps behind the frame of the opening when you close the flap.
How the lock works
The manufacturer describes the Magic as a flap lock with a latching closure. Just push the flap shut and the latch closes by itself. To open it, you pull the handle on the outer part, which retracts the latch. Once you turn the key, the handle is blocked and the flap cannot be opened.
Replacing an old lock
First unscrew the inner part from the locker side, then take the outer part out of the opening. Clean the edges of the cut-out, insert the new lock from the outside and screw on the inner part. Finally, check that the latch catches evenly behind the frame and that the handle and key work smoothly. If the flap does not close fully, check the position of the latch relative to the frame.
Where it fits
The lock is designed for external flaps and doors in camper conversions. It replaces a worn, cracked or lost lock, or lets you use the same type of lock on several flaps.
- service hatches on motorhomes and caravans
- external lockers and gas bottle boxes
- rear garage doors on motorhomes
- flaps in camper vans and conversions
Care
Once a season, clean dust and sand off the handle and latch. Use a lock lubricant spray for the cylinder rather than oil, which attracts dirt. Before winter, check that the key turns easily, as frozen water in the cylinder makes opening difficult. Keep a spare key outside the vehicle.
Key data at a glance
| Feature | Value |
|---|---|
| Manufacturer | FAP |
| Model | Magic |
| Type | flap lock with latching closure |
| Colour | black, silver grey handle |
| Outer part | 105 x 85 mm |
| Inner part | 120 x 55 mm |
| Hole spacing | 65 x 40 mm |
| Cylinder | New System, with keys |
| Contents | outer part, inner part, cylinder, keys |
Questions and answers
Is this a complete lock?
Yes. The set includes the outer part with handle and cylinder, the inner part with latch, and keys.
Does it fit the motorhome entrance door?
No. It is a lock for service hatches, lockers and garage doors, not for the habitation entrance door.
How do I check it replaces my old lock?
Measure the outer part of the old lock and the screw spacing. This model is 105 x 85 mm with 65 x 40 mm hole spacing.
What cylinder does the lock have?
The lock has a New System cylinder. According to the manufacturer, the housing also accepts HSC and Zadi cylinders.