Dometic PerfectView CAM 18W NAV ball camera - white, 140°, IP69K, NAV adapter, for motorhome and caravan
- Dometic PerfectView CAM 18W NAV is a white 140° ball camera with microphone, 5 LEDs and a NAV adapter. IP69K, 12 V. For motorhomes, caravans and as a side camera.
Dometic PerfectView CAM 18W NAV is a colour ball camera in white (catalogue number 9600000104). The compact ABS housing is easy to aim, so it works as a reversing camera or as a side camera. The wide-angle lens gives approx. 140° diagonal, and five LEDs support the image at night. The set includes a NAV adapter for original multimedia displays or navigation devices. Protection class IP69K, supply 12 V DC, integrated microphone. According to the product card the pack includes the camera with a navigation adapter for RCA-based PAL monitors, with installation material as listed for the set.
Key features
- PerfectView CAM 18W NAV ball camera, white finish
- viewing angle approx. 140° diagonal
- 1/3" CMOS sensor, approx. 350,000 px, PAL standard
- five LEDs for night use
- integrated microphone
- ABS housing, IP69K class
- suitable as a rear-view or side camera
- NAV adapter for multimedia or navigation systems
- 12 V DC supply, operating temperature -20 to +70°C
- dimensions 84 x 58 x 44 mm, net weight approx. 0.15 kg
What it is for
CAM 18W NAV watches the area behind or beside the vehicle. The approx. 140° diagonal angle gives a wide view when manoeuvring, and the compact ball housing makes aiming easy.
The camera is intended for vehicles. In practice it is fitted on motorhomes or caravans as a rear or side camera.
Image and sound go to a multimedia or navigation display via the NAV adapter, or to a separate PerfectView monitor, depending on the wiring setup you choose.
Installation notes
- Fit the camera bracket on a rigid surface as described in the manual and aim the ball so the required zone is in frame.
- Route the cable to the cab so it cannot chafe on sharp edges or foul moving parts.
- Connect the camera and NAV adapter to a 12 V DC supply and to the display as shown in the wiring diagram.
- When testing circuits, use a diode test lamp or a voltmeter.
- After fitting, check the picture, microphone and LED performance in low light.
Scope of delivery
- PerfectView CAM 18W NAV camera (white).
- Navigation adapter for RCA-based PAL monitors.
- Installation material as listed for the set.
- Manual.
CAM 18W NAV versus other PerfectView cameras
CAM 18W NAV is a compact ball camera with a NAV adapter and a 140° angle. The other colour is available as PerfectView CAM 18. If you need a 120° aluminium camera with a heater, choose the CAM 45 NAV series.
Safe use
- A rear-view system is only an aid. It does not replace careful reversing or mirror checks.
- Operating temperature: -20 to +70°C.
- The housing is IP69K, but seal mounting holes only as the manual describes.
- Road-traffic rules still apply.
Care
Wipe the lens and housing with a soft, damp cloth without aggressive solvents. Keep connectors dry and clean. After washing the vehicle, check that dirt is not blocking the LEDs or lens.
Related products
- PerfectView CAM 18 NAV black - same ball camera in black
- PerfectView CAM 45W NAV white - 120° camera with heater and NAV adapter
- PerfectView CAM 45 white - compact 120° camera without NAV adapter
- PerfectView M 75L AHD - 7" LCD monitor from the PerfectView range
- PerfectView CAM44 silver - twin camera 140/50°
Technical data
| Parameter | Value |
|---|---|
| Brand / model | Dometic PerfectView CAM 18W NAV |
| Catalogue number | 9600000104 |
| Colour | white |
| Type | colour ball camera |
| Sensor | 1/3" CMOS, approx. 350,000 px |
| Video standard | PAL |
| Viewing angle | approx. 140° diagonal |
| Sensitivity | < 1 lux; 0 lux with LED (series data) |
| LEDs | 5 LEDs |
| Microphone | integrated |
| Housing | ABS |
| Use | rear-view or side camera |
| IP class | IP69K |
| Supply | 12 V DC |
| Dimensions (W x H x D) | 84 x 58 x 44 mm |
| Net weight (manufacturer) | approx. 0.15 kg (series manual: approx. 160 g) |
| NAV adapter | yes |
| Operating temperature | -20 to +70°C |
FAQ
Is it only a rear camera?
No. According to the Dometic product card it can be used as a reversing camera or as a side camera - the ball housing is easy to aim.
What viewing angle does it have?
Approx. 140° diagonal.
Is a NAV adapter included?
Yes. That is what distinguishes the NAV version from the standard CAM 18.
What is the protection class?
IP69K.
What power supply is required?
12 V DC. Operating temperature: -20 to +70°C.
Can I connect it to any monitor?
The NAV adapter is intended for original multimedia displays or navigation devices (including PAL/RCA input as described on the product page). Match connectors using both manuals - we do not claim compatibility with every monitor.
Manufacturer
Dometic Germany GmbH, Hollefeldstrasse 63, 48282 Emsdetten, Germany.