Horrex pleated fly screen door for Fiat Ducato, Peugeot Boxer, Citroën Jumper sliding door from 2007, H1 roof, from L2, black
- Horrex pleated fly screen door for the Fiat Ducato, Peugeot Boxer, Citroën Jumper sliding door from 2007, standard roof H1, length L2 or longer, left-hand drive version. Fitted with clips and screws. Black profiles, black mesh, 118.5 x 144.6 cm.
The Horrex pleated fly screen door for the sliding side door of the Fiat Ducato, Peugeot Boxer, Citroën Jumper from 2007 (standard roof H1, length L2 or longer), left-hand drive version, lets you keep the door open and enjoy the view without mosquitoes and other insects inside. The pull bar stays in any position and the screen runs quietly and smoothly. It comes as a semi-assembled kit with mounting parts.
Construction
- top guide profile in aluminium 23.5 x 24.6 mm, powder coated
- aluminium pull bar 50 x 17 mm
- bottom guide profile in anodised aluminium 35.5 x 21.5 mm
- black pleated polyester mesh, mesh opening 1.3 x 1.3 mm
- corner pieces and caps in PA6 and PA6.6
Installation
- the top guide is held by 4 clips under the door rubber
- the bottom guide is screwed to the floor with 4 screws 3.5 x 16 mm
- cassette and slider clamp are fixed with 2.9 x 9.5 mm screws
- minimum door opening: width 1295 mm (measured at the bottom), height 1445 mm
- required space: 27 mm between door rubber and top cabinet, 20 mm between sliding door and kitchen cabinet
Dimensions
- top guide profile length 1185 mm
- bottom guide profile length 1295 mm
- overall height 1446 mm
- manual step-less adjustment
Use and care
- before closing, make sure the bottom guide is not blocked by objects or cables
- the screen protects fully only when the pull bar and brush sit against the vehicle along their whole length
- clean with a soft damp cloth and mild detergent, no sharp tools or aggressive chemicals
- spray the rails with silicone spray from time to time
- children under 5 should only use the screen under adult supervision
The manufacturer graphics may show the optional side panel, which Horrex sells separately. The set includes the items listed in the description.
Horrex fly screen doors for other vehicles
- Horrex fly screen door for Fiat Ducato, Peugeot Boxer, Citroën Jumper H2/H3
- Horrex fly screen door for VW T5 and T6/T6.1
- Horrex fly screen door for VW Crafter 2 and MAN TGE
- Horrex fly screen door for Mercedes Sprinter and VW Crafter 1st generation
- Horrex fly screen door for Mercedes-Benz Sprinter from 2018
- Horrex fly screen door for Ford Transit 7th generation
Technical data
| Parameter | Value |
|---|---|
| Manufacturer | Horrex (Netherlands) |
| Product | Pleated sliding door fly screen (Van Fly Screen Door) |
| Vehicle | Fiat Ducato, Peugeot Boxer, Citroën Jumper |
| Model years | from 2007 |
| Roof | standard roof H1, length L2 or longer |
| Version | left-hand drive vehicles |
| Installation | inside the sliding side door |
| Dimensions (W x H) | 118.5 x 144.6 cm |
| Top guide profile length | 1185 mm |
| Bottom guide profile length | 1295 mm |
| Minimum door opening | 1295 x 1445 mm |
| Profiles | aluminium, black |
| Mesh | polyester, black, 1.3 x 1.3 mm opening |
| Plastic parts | PA6 / PA6.6 |
| Fixing | 4 clips at the top, screws at the bottom |
| Manufacturer warranty | 2 years |
Questions and answers
Which vehicles does it fit?
The sliding side door of the Fiat Ducato, Peugeot Boxer, Citroën Jumper from 2007, standard roof H1, length L2 or longer. This is the left-hand drive version.
Do I need to drill?
The top guide is held by 4 clips under the door rubber and the bottom guide is screwed to the floor with 4 screws. Screws are included.
Will it fit my conversion?
The manufacturer requires 27 mm between door rubber and top cabinet and 20 mm between sliding door and kitchen cabinet. The door opening must be at least 1295 x 1445 mm and must not be narrowed by strips or panels.
How do I look after it?
Clean it with a soft damp cloth and mild detergent and spray the rails with silicone spray from time to time.
What warranty does the manufacturer give?
Horrex gives a standard 2-year warranty.
Manufacturer
Horrex Horren B.V., Taanderijstraat 19, 3133 ET Vlaardingen, The Netherlands.