Dometic PerfectView RV-ADAPT 1 CRT cable adapter - 6-pin DIN, black, for WAECO systems up to 2009
- Dometic PerfectView RV-ADAPT 1 is a black 6-pin DIN cable adapter for WAECO CRT systems fitted up to 2009. It helps replace the camera with a PerfectView unit without new vehicle wiring.
Dometic PerfectView RV-ADAPT 1 is a camera cable adapter (catalogue number 9600000213) for older WAECO CRT systems. Per the Dometic product page it is a black cable with a 6-pin DIN connector, intended for systems installed up to 2009. It lets you replace the old camera with a new PerfectView unit and keep the existing vehicle wiring.
Key features
- PerfectView RV-ADAPT 1 adapter for WAECO CRT systems
- 6-pin DIN connector, black
- for CRT installations made up to 2009
- connect a new PerfectView camera without laying new cables
- scope of delivery: adapter cable
- net weight per producer about 0.1 kg
What it is for
RV-ADAPT 1 links a new PerfectView camera to the existing wiring of an older WAECO CRT system. You do not need to pull a new cable through the bodywork if the old installation is sound and within the up-to-2009 scope.
It is not a camera or a monitor - only a short adapter between the new camera and the old CRT socket / loom.
It is used in motorhomes and caravans that already have a factory or earlier WAECO CRT system and you want to move to a current PerfectView camera.
Installation notes
- Check that your WAECO CRT system was installed up to 2009 - outside that scope the adapter may not fit.
- Disconnect the old camera and fit RV-ADAPT 1 between the existing loom and the new PerfectView camera as described in both manuals.
- Make sure the video standard and picture mode (mirrored / normal) match the new camera and monitor.
- Do not crush the DIN connector or pull on the cable when unplugging.
- After connection, check the image in reverse and, if the new camera supports it, outside reverse.
What is in the box
- PerfectView RV-ADAPT 1 adapter cable (black, 6-pin DIN).
RV-ADAPT 1 versus other PerfectView products
RV-ADAPT 1 is only a bridge to the old CRT installation. You choose the new camera separately: CAM44, CAM44W, CAM 44 NAV or CAM 440. If you do not have a WAECO CRT system up to 2009, you do not need this adapter - a new camera comes with its own system cable.
Safe use
- The adapter does not repair damaged old wiring - if cables are worn, replace the run as described in the new camera manual.
- Match a PerfectView camera whose connectors and signal suit RV-ADAPT 1 and your monitor.
- When working on the installation, disconnect power and protect the looms from short circuits.
- Do not use the adapter outside the WAECO CRT up-to-2009 scope described by Dometic.
Care
Keep the DIN contacts clean and dry. Do not use aggressive solvents on the insulation. After the season, check the plug for corrosion.
Related products
- PerfectView CAM44 - PerfectView twin camera (new camera to connect via the adapter)
- PerfectView CAM 44 NAV - CAM44 version with NAV adapter
- PerfectView CAM44W - white PerfectView twin camera
- Dometic PerfectView M 75L AHD - 7" AHD LCD monitor from the PerfectView range
- PerfectView CAM 440 - newer PerfectView dual-view camera
Technical data
| Parameter | Value |
|---|---|
| Producer / model | Dometic PerfectView RV-ADAPT 1 |
| Catalogue number | 9600000213 |
| Type | camera cable adapter for CRT systems |
| Connector | 6-pin DIN |
| Colour | black |
| Application range | WAECO CRT systems installed up to 2009 |
| Contents | adapter cable |
| Dimensions (W x H x D) | 150 x 14 x 14 mm |
| Net weight (producer) | about 0.1 kg |
FAQ
What is RV-ADAPT 1 for?
It helps connect a new PerfectView camera to existing WAECO CRT wiring without laying a new cable run.
Which systems are covered?
Per Dometic: all WAECO CRT systems installed up to 2009.
What connector does the adapter use?
A black cable with a 6-pin DIN connector.
Is a camera included?
No. The set is the adapter cable only. You buy the PerfectView camera separately.
Do I need it for a new CAM44 installation?
No. New PerfectView cameras have their own system cables. RV-ADAPT 1 is for upgrading an old CRT.
Manufacturer
Dometic Germany GmbH, Hollefeldstrasse 63, 48282 Emsdetten, Germany.