HPL furniture board light grey 122 x 244 cm - poplar plywood with HPL laminate on both sides, for motorhome and van conversions
- Full sheet 122 x 244 cm of poplar plywood with HPL laminate in light grey on both sides. Area approx. 2.98 m2, weight approx. 21 kg. For cabinets, kitchen units and beds in motorhomes, vans and caravans.
The HPL furniture board in light grey is a full sheet measuring 122 x 244 cm for building your own furniture in a motorhome, van or caravan. The core is poplar plywood and both sides are covered with HPL laminate in the same colour. This means the board looks the same on both sides and can be used for fronts as well as for cabinet walls that are visible from two sides. The sheet has an area of approx. 2.98 m2 and weighs approx. 21 kg. The colour light grey is one of the new board colours for the 2027 season and forms a matching palette with the other new colours in this range.
Key features
- full sheet 122 x 244 cm
- area approx. 2.98 m2
- poplar plywood core
- HPL laminate on both sides
- colour: light grey
- weight approx. 21 kg
- 1 board supplied
- new colour for the 2027 season
The photo shows a sample corner with an aluminium profile and edge band strips. It shows how the board looks in a finished build. The profile and edge band are not included.
Colour and surface
Light grey is a plain, neutral colour, lighter than the usual greys used in conversions. It gives a calm, modern interior and at the same time shows dust and small marks less than pure white. It goes well with aluminium profiles and silver fittings. It works on cabinet carcasses, partition walls and side panels.
Poplar plywood with HPL laminate
Poplar plywood is one of the lighter types of plywood, which is why it is often chosen for vehicle conversions where every kilogram counts. The cross-laminated veneer layers make the board stiff and help it hold screws well. HPL is a high-pressure laminate that forms a hard, smooth surface for everyday use. It is easy to wipe with a damp cloth, which matters in a motorhome kitchen and near the door, where furniture comes into contact with water, sand and mud. Laminate on both sides balances the board, so large parts are less likely to warp.
What the board is for
- carcasses and fronts of upper and lower cabinets
- kitchen units, sink and hob cabinet
- bed box and mattress frame
- wardrobe, shelves and storage
- partition walls and bathroom panelling
- covers for electrics and batteries
- furniture in caravans, vans and motorhomes
Format and handling
A full 122 x 244 cm sheet lets you cut several large parts from one board, for example a wardrobe side, a front and shelves. That means fewer joints and the same colour on all parts. The board weighs approx. 21 kg and is large, so a second person helps when carrying and cutting it. Store it flat on an even surface in a dry place so that it does not warp before you work on it.
Cutting and fitting
- cut with a fine-tooth saw blade made for laminated boards to avoid chipping
- put masking tape along the cutting line for extra protection of the laminate
- when drilling, place a piece of wood under the board for a clean exit hole
- leave the plywood edges visible or cover them with edge band or a profile
- join parts with corner profiles, angles or furniture connectors
- screw furniture to fixing points in the vehicle so it does not move while driving
How to combine colours
Light grey is a calm background for the wood decors, matt maple and light oak. Combined with matt black it gives a modern, technical look, with warm white matt a bright, subdued interior.
Care
Clean the laminate with a soft, damp cloth and a little mild detergent. Do not use scouring powder, abrasive sponges or solvents, which can dull or scratch the surface. Protect exposed plywood edges from long contact with water, ideally by covering them with edge band or a profile.
Surface close-up
The close-up shows a plain light grey surface without a pattern. With a plain colour the cutting direction does not affect the look, which helps you use the sheet economically.
Other colours in this range
- HPL furniture board matt maple 122 x 244 cm - same format and same board construction
- HPL furniture board light oak 122 x 244 cm - same format and same board construction
- HPL furniture board warm white matt 122 x 244 cm - same format and same board construction
- HPL furniture board matt black 122 x 244 cm - same format and same board construction
Technical data
| Parameter | Value |
|---|---|
| Type | furniture board, full sheet |
| Core | poplar plywood |
| Surface | HPL laminate on both sides |
| Colour | light grey |
| Dimensions | 122 x 244 cm |
| Sheet area | approx. 2.98 m2 |
| Weight | approx. 21 kg |
| Contents | 1 board |
| Profile and edge band in the photo | not included |
| Use | motorhome, van and caravan furniture |
Frequently asked questions
Is the laminate on both sides of the board?
Yes. Both sides are covered with HPL laminate in light grey, so the board is also suitable for parts visible from two sides.
How much does one sheet weigh?
Approx. 21 kg at 122 x 244 cm.
Is the aluminium profile from the photo included?
No. The photo shows a sample corner, the offer covers 1 board without profiles or edge band.
Can I combine this colour with other boards?
Yes. The colour belongs to the new range for the 2027 season, which also includes matt maple, light oak, warm white matt, matt black and light grey.
What should I cut the board with?
With a fine-tooth saw blade for laminated boards. Put masking tape along the cut so the laminate does not chip.
Manufacturer
Reimo Reisemobil-Center GmbH, Boschring 10, 63329 Egelsbach, Germany.