ABL City Water Connection with Pressure Reducer and Magnetic Lid, light grey, 130 x 145 mm - Mains Water Straight into the Motorhome
- ABL City water connection, light grey, with pressure reducer to approx. 1.1 bar, backflow preventer and magnetic lid. Mains water straight into the motorhome.
The ABL City water connection in light grey lets you connect a motorhome or caravan with a hose straight to the tap on the campsite. The built-in reducer lowers the mains pressure to about 1.1 bar, safe for the vehicle installation, and the backflow preventer stops water from the vehicle flowing back into the mains.

Water without carrying cans
On a longer stay you do not have to watch the tank level. Water flows from the mains straight into the system at up to 7 l/min, and the motorhome pump stays off. The inlet accepts up to 10 bar.
- Pressure reducer, approx. 1.1 bar output
- Backflow preventer
- ½" hose nipple
- Flow up to 7 l/min
Magnetic lid
ABL lids open wide, up to 180°, and the metal hinge axle is hidden. The lid is held by magnets, so it does not spring open or rattle while driving. All visible parts are made of UV-resistant plastic, so the colour lasts.
Installation
The connection has a 130 x 145 mm frame, an 85.5 x 90 mm wall cut-out and an installation depth of 110 mm. Inside the vehicle it is connected to the cold water line downstream of the pump. Drain it before winter so frost cannot damage the reducer.
Matching products
Other colours: white, anthracite.
About ABL
ABL is a German maker of electrical accessories from Lauf an der Pegnitz and the company behind the SCHUKO plug. In motorhome and caravan supply sockets ABL is one of the leading suppliers in Europe, and many vehicle makers fit its service boxes at the factory.
Key data at a glance
| Feature | Value |
|---|---|
| Brand | ABL |
| Type | city water connection |
| Colour | light grey |
| Lid closure | magnetic, opens up to 180° |
| Pressure | inlet up to 10 bar, output approx. 1.1 bar |
| Flow rate | 7 l/min |
| Connection | ½" hose nipple, backflow preventer |
| Dimensions | 130 x 145 mm |
| Wall cut-out | 85.5 x 90 mm |
| Installation depth | 110 mm |
| Weight | 490 g |
Questions and answers
Can I connect it to an ordinary tap?
Yes, with a hose fitted to the ½" nipple. The reducer lowers the mains pressure, so the motorhome system is not overloaded.
Does the water go into the tank?
No, it feeds the vehicle water system directly. The tank is filled through the water filler.





