Berker Integro Flow Frame with Hinged Cover for Socket, Anthracite Matt - 1-Gang 59.5 x 59.5 mm for Motorhomes and Caravans
- Berker Integro Flow 1-gang frame with hinged cover, anthracite matt, 59.5 x 59.5 x 17.9 mm. It covers the socket when you do not use it. For electrical installations in motorhomes and caravans.
The Berker Integro Flow frame with hinged cover combines a cover frame and a flip-up lid in one part. You fit it instead of a standard 1-gang frame on a socket from the Integro range. When you do not use the socket, the lid closes its opening, and when you want to plug something in, you simply lift it with your finger. The matt anthracite finish matches the other Integro devices in the same colour, so the whole panel in your motorhome or caravan looks consistent.
Frame and cover in one
- 1-gang frame with a cover that flips up on hinges
- Berker Integro Flow range, anthracite matt (similar to RAL 7021)
- size 59.5 x 59.5 mm, depth 17.9 mm
- opening for the socket face 42.5 mm in diameter
- halogen free thermoplastic, RoHS and REACH compliant
- protection class IP20, impact resistance IK02
The cover is part of the frame, so you need no extra parts. All you need is a socket insert from the Integro range.
The Berker Integro system in your vehicle
Integro is a modular Berker switch range designed for leisure vehicles. It consists of compact inserts measuring 55.5 x 55.5 mm, such as 230 V sockets, 12 V sockets, USB sockets and switches, and of frames that cover their edges. Frames come in 1-gang, 2-gang and 3-gang versions. The frame with hinged cover is a 1-gang version made for sockets. With one system you can extend the panel in your motorhome step by step and keep the same look for all parts.
When to choose a frame with cover
A frame with a lid is useful wherever a socket is clearly visible but used only now and then: at the dinette table, next to the bed, in a storage locker or in the rear garage. The closed cover hides the socket opening, so the panel looks tidier, and dust and crumbs get into the socket less easily. The lid does not block the socket for good, so you can plug in a charger, a kettle or another appliance at any time.
IP20 protection - where not to fit it
The frame has protection class IP20. This means it does not protect the socket against water, so do not fit it outside the vehicle, in a shower cubicle or anywhere exposed to splashing. For such places Berker provides a separate IP44 solution that needs a seal, a hinged frame marked IP44 and a protective box. This frame is meant for dry areas inside a motorhome, caravan or camper van.
Installation step by step
- Switch off the 230 V supply: unplug the hook-up cable and switch off the inverter if it feeds the sockets.
- Remove the existing frame from the Integro socket.
- Place the frame with cover on the socket insert so that the hinge is at the top and the socket face fits into the 42.5 mm opening.
- Fix the socket insert in the box as described by the manufacturer, so that the frame is pressed against the wall.
- Check that the cover opens and closes freely and that the plug goes fully into the socket.
- Switch the power back on and test the socket. Work on 230 V installations should be done by a qualified electrician.
What it fits
- sockets from the Berker Integro range, for example the 16 A Schuko socket
- replacing a standard Integro 1-gang frame with a version with lid
- electrical installations in motorhomes, caravans and camper vans
- panels where you want one colour and one design line
Matching parts
- Berker Integro Schuko socket 16 A, anthracite matt - the socket insert you fit the frame on
- Berker Integro 1-gang frame, anthracite - standard frame without lid for switches and sockets
- Berker Integro Flow 2-gang frame, anthracite matt - for two inserts side by side
- Berker Integro Flow 3-gang frame, anthracite matt - for three inserts side by side
- Berker Integro off switch, anthracite - a switch from the same range
- Berker USB-A and USB-C socket 12 V, anthracite - charging phones and tablets in the same style
- Berker Integro surface mounting spacer, anthracite - a part of the range for surface mounting on the wall
Technical data
| Parameter | Value |
|---|---|
| Manufacturer | Berker |
| Range | Integro Flow |
| Type | 1-gang frame with hinged cover |
| Use | sockets (Integro modular inserts) |
| Colour | anthracite matt (similar to RAL 7021) |
| Material | thermoplastic, halogen free |
| Width x height | 59.5 x 59.5 mm |
| Depth | 17.9 mm |
| Opening diameter | 42.5 mm |
| Number of gangs | 1 |
| Mounting | flush mounting, clamp fixing |
| Protection class | IP20 |
| Impact resistance | IK02 |
| Label field | no |
| RoHS and REACH compliant | yes |
| Manufacturer part number | 918282505 |
| EAN | 4011334239789 |
Frequently asked questions
Does the frame include a socket?
No. This is the frame with cover only. You buy the Integro socket insert separately, for example the 16 A Schuko socket in the same colour.
Can I fit it outside my motorhome?
No. The frame has protection class IP20 and does not protect against water. For damp places Berker provides a separate IP44 solution.
Can I combine it with a 2-gang or 3-gang frame?
No. It is a 1-gang frame that replaces a standard single frame. It cannot be combined with multiple frames.
Does it fit Berker sockets from other ranges?
The frame is made for inserts of the Integro system. For sockets from other Berker ranges choose the frames of those ranges.
How do I clean the matt surface?
Wipe it with a soft, slightly damp cloth. Do not use abrasive cleaners or solvents, as they can change the look of the matt plastic.
Manufacturer
Berker GmbH & Co. KG, Zum Gunterstal, 66440 Blieskastel, Germany.