Berker Integro USB-A and USB-C Charging Socket 12 V with QC and PD 30 W, Anthracite Matt - for Motorhomes, Caravans and Boats
- Berker Integro USB-A and USB-C socket for 12 V and 24 V systems, input 8-30 V DC. USB-C up to 30 W with PD, QC and PPS, USB-A up to 24 W with QC and PPS. Anthracite matt, 15 cm cables.
The Berker Integro USB-A and USB-C socket is a built-in charger that you power directly from the 12 V system of your motorhome, caravan, camper van or boat. The USB-C port supports Power Delivery up to 30 W, so it quickly charges a modern smartphone, a tablet or even a small laptop charged via USB-C. Next to it there is a classic USB-A port with QC fast charging for older cables and devices. The socket has a matt anthracite finish and matches the switches, 230 V sockets and frames of the Integro range in the same colour.
Fast charging from the 12 V system
- two ports: USB-A and USB-C
- USB-C: Power Delivery (PD), Quick Charge (QC) and PPS
- USB-A: Quick Charge (QC) and PPS
- max. power: 30 W on USB-C and 24 W on USB-A
- input voltage 8-30 V DC, for 12 V and 24 V systems
- output voltage up to 20 V DC, depending on the connected device
- standby current max. 5 mA
- colour anthracite matt
The socket adjusts the charging voltage to the connected device, so you can safely charge a phone, a tablet or headphones.
The Berker Integro system in motorhomes and caravans
Integro is a modular Berker switch range made for leisure vehicles, boats and vehicle interiors. The range includes USB sockets, 230 V sockets, switches and 1-gang, 2-gang and 3-gang frames in several colours. You can mount the USB socket in one frame with a light switch or a Schuko socket and get a consistent panel at the table, next to the bed or in the cab.
What the USB socket is useful for
The socket runs on the leisure battery, so you can charge your phone, tablet, navigation device, camera, headphones or power bank even when the motorhome is not connected to 230 V. Charging directly from 12 V does not require switching on the inverter, which reduces energy losses. The USB-C port with Power Delivery up to 30 W shortens the charging time of new smartphones and tablets, and the USB-A port handles older cables and accessories. The standby current is max. 5 mA, so the socket puts very little load on the battery while you are parked.
Protection and power supply
The manufacturer has equipped the socket with protection against short circuit, overload, overvoltage, reverse polarity and overtemperature. The wide input voltage range of 8-30 V DC means the socket works in 12 V systems and also in 24 V systems, for example in trucks and on boats. Power is supplied through factory-fitted 2 x 0.5 mm² cables, red and black, 150 mm long.
Installation step by step
- Disconnect the 12 V supply with the main switch or the circuit fuse.
- Prepare an opening in the panel or a spacer ring for surface mounting.
- Connect the red cable to positive and the black cable to negative through a suitable fuse.
- Place the socket in the opening and fix it with screws through the holes in the plate.
- Fit an Integro frame, a 1-gang or a multiple one.
- Switch the power back on and check charging on both ports.
Ready-made connection cables
- cables 2 x 0.5 mm², red (positive) and black (negative)
- cable length 150 mm
- reverse polarity protection
- protection against short circuit, overload, overvoltage and overtemperature
The cables are factory fitted, so in the vehicle you only connect them to the wires of the 12 V system, for example with connectors or in a terminal strip.
Matching parts
- Berker Integro Flow frame with hinged cover, anthracite matt - a frame with a lid that covers the socket
- Berker Integro 1-gang frame, anthracite - a frame for one insert
- Berker Integro 2-gang frame, anthracite - two inserts side by side in one panel
- Berker Integro 3-gang frame, anthracite - three inserts in one panel
- Berker Integro Flow Schuko socket 16 A, anthracite matt - a 230 V socket from the same range
- Berker Integro off switch, anthracite - a light or circuit switch from the same range
- Berker Integro surface-mounting spacer ring, anthracite - mounting an insert on the wall surface
Technical data
| Parameter | Value |
|---|---|
| Manufacturer | Berker |
| Range | Integro |
| Type | USB-A and USB-C charging socket |
| Ports | 1 x USB-A, 1 x USB-C |
| USB-C protocols | PD, QC, PPS |
| USB-A protocols | QC, PPS |
| Max. power | 30 W (USB-C) + 24 W (USB-A) |
| Input voltage | 8-30 V DC |
| Output voltage | up to 20 V DC |
| Standby current | max. 5 mA |
| Protection | short circuit, overload, overvoltage, reverse polarity, overtemperature |
| Cables | 2 x 0.5 mm², red and black, 150 mm |
| Colour | anthracite matt |
| Manufacturer part number | 926052505 |
| EAN | 4011334000525 |
Frequently asked questions
Does the socket work in a 24 V system?
Yes. The input voltage is 8-30 V DC, so the socket works in 12 V and 24 V systems.
Can I charge a laptop via USB-C?
The USB-C port supports Power Delivery up to 30 W. This is enough for phones, tablets and some smaller laptops charged via USB-C. Larger laptops may charge more slowly.
Does the socket drain the battery while parked?
The standby current is max. 5 mA. If you leave the vehicle for a longer time, you can disconnect the socket with the circuit switch.
Is a frame included?
No. You choose the Integro frame separately, a 1-gang or a multiple one if you want to fit a switch or a 230 V socket next to it.
How do I connect the cables?
Connect the red cable to positive and the black cable to negative of the 12 V system, ideally through a separate fuse.
Manufacturer
Berker GmbH & Co. KG, Zum Gunterstal, 66440 Blieskastel, Germany.