BlueCraft Pot Support for Turbo Gas Stove, 1-Burner and 2-Burner, Enamelled, 192 x 195 mm - Spare Part
- Enamelled BlueCraft pot support for the Turbo gas stove in the 1-burner and 2-burner version. Spare part measuring 192 x 195 x 44 mm with a weight of 404 g.
The BlueCraft pot support is a spare part for the Turbo stainless steel gas stove in the 1-burner and 2-burner version. It has an enamelled surface and is shaped as a square plate with a round opening above the burner and four arms that hold a pot, frying pan or kettle. The pot support measures 192 x 195 x 44 mm and weighs 404 g. The manufacturer part number is 805194.

Key features
- spare part for the Turbo stainless steel gas stove
- fits the 1-burner and 2-burner version
- material: enamel
- dimensions 192 x 195 x 44 mm
- net weight 404 g
- four arms for the cookware around a round opening above the burner
- manufacturer part number 805194
What a pot support is for
The pot support sits above the burner and keeps the cookware at a fixed distance from the flame. A pot, frying pan or kettle rests on the four arms, while the flame passes through the round opening in the middle and heats the bottom of the cookware. This keeps the cookware stable and gives the burner a free air supply.
During cooking the pot support works at high temperatures, is in contact with hot cookware and often gets soiled with grease or burnt food. Over time it can warp, crack or lose its coating. Instead of replacing the whole stove, you simply fit a new pot support made for the same model.
This part is intended for the Turbo stainless steel gas stove in the version with one burner and the version with two burners. The Turbo stove with three burners uses a separate pot support, available as its own product.
Replacing the pot support
- Turn off the gas supply and wait until the stove and the old pot support have cooled down completely.
- Lift the old pot support off the stove.
- Clean the area under the pot support and around the burner from food residue and grease.
- Place the new pot support in the same position as the old one, with the opening centred above the burner.
- Check that the pot support sits firmly and does not move before placing cookware on it.
Caring for the enamelled surface
- clean the pot support only once it has cooled down
- wash it with warm water, washing-up liquid and a soft sponge
- do not use sharp tools or steel wool, which can scratch the enamel
- protect the pot support from knocks, as the enamel can chip
- dry it thoroughly after washing before fitting it again
Safe use
- the pot support gets hot during cooking, remove it only once it has cooled down
- use the gas stove according to its manufacturer instructions
- place cookware centrally above the burner
- do not use the stove with a cracked or clearly warped pot support
Matching products and parts
- Turbo stainless steel gas stove, 1 burner - the stove this pot support fits
- Turbo stainless steel gas stove, 2 burners - the second stove version this pot support fits
- Perforated burner head for Turbo 1 and 2-burner stove - burner spare part for the same versions
- Thermocouple for Turbo gas stove - part of the flame safety device of the Turbo stove
- Pot support for Turbo 3-burner stove - separate pot support for the three-burner version
Key data at a glance
| Parameter | Value |
|---|---|
| Brand | BlueCraft |
| Type | pot support, spare part |
| Fits | Turbo stainless steel gas stove, 1-burner and 2-burner version |
| Material | enamel |
| Length | 192 mm |
| Width | 195 mm |
| Height | 44 mm |
| Net weight | 404 g |
| Manufacturer part number | 805194 |
Frequently asked questions
Which stove does this pot support fit?
The Turbo stainless steel gas stove in the 1-burner and 2-burner version.
Does it fit the Turbo stove with three burners?
No. The 3-burner version uses a separate pot support.
What is the pot support made of?
The pot support has an enamelled surface.
What are the dimensions of the pot support?
It measures 192 x 195 x 44 mm and weighs 404 g.
Manufacturer
Stellfeld & Ernst GmbH, Oberste-Wilms-Str. 22a, 44309 Dortmund, Germany, info@stellfeld-ernst.de





