Carbest surface-mounted gas hob 2 burners 2.8 kW in line, stainless steel, flame failure device, 30 mbar, 290 x 440 mm - for motorhome
- Carbest surface-mounted gas hob in polished stainless steel for motorhomes, vans and caravans: 2 burners 1.8 kW and 1.0 kW (204 g/h), flame failure device, LPG 30 mbar, 290 x 440 x 95 mm.
The Carbest surface-mounted gas hob with two burners one behind the other is a durable polished stainless steel cooker for motorhomes, campervans, caravans and self-build conversions. It runs on LPG (propane, butane, G30/G31) at 30 mbar, has 1.8 kW and 1.0 kW burners with a total of 2.8 kW and a thermoelectric flame failure device that shuts off the gas if the flame goes out. This surface-mounted model has a 95 mm high housing, so no cut-out for the whole hob is needed; the knobs sit on a black panel on the narrow side in front of the burners. Narrow and long, it suits slim worktops.

Key features
- Polished stainless steel, durable and easy to keep clean
- 2 burners: 1.8 kW and 1.0 kW, total 2.8 kW (204 g/h)
- Thermoelectric flame failure device (thermocouple) on every burner
- Manual ignition with a match or an electric lighter
- Aluminium burner heads, stainless steel flanges with integrated pan support
- Knobs on a black front panel
- LPG, category I3B/P, 30 mbar
- Dimensions 290 x 440 x 95 mm, surface-mounted
Where this hob fits
A stainless steel gas hob is a classic, proven choice for a motorhome or van kitchen. Two burners with different output let you cook and simmer at the same time: the larger one (1.8 kW) for fast cooking, the smaller one (1.0 kW) for simmering and keeping food warm. Polished steel copes well with daily use on the road.

Installation
- Surface-mounted model 290 x 440 x 95 mm, no cut-out for the whole hob required
- Minimum distance 55 mm to the rear wall and 100 mm to a side wall
- At least 650 mm between pan support and cupboards or extractor hood above
- Adjacent furniture must withstand 65 K above room temperature (90 °C at 25 °C)
- Gas inlet: smooth Ø 8 mm pipe without thread, pointing down, at least 30 mm long, connected with a gas-tight compression fitting according to local regulations
- Mounting material and user manual included
- Installation, connection and leak test by a qualified fitter; never test for leaks with a flame
Gas connection and ventilation
The hob runs only on LPG (propane G31, butane G30) at 30 mbar, category I3B/P. Conversion to another gas or replacing the injectors is not permitted. The regulator on the cylinder must comply with EN 12864. The appliance has no flue, so the room needs ventilation: an air supply of at least 2 m³/h per kW of output through an opening of at least 100 cm². As LPG is heavier than air, the gas locker needs a vent at floor level.
Operation
To light a burner, open the gas supply, press the knob and turn it anticlockwise (about 90°) to the mechanical stop, then hold a match or lighter to the burner. Keep the knob pressed for a few more seconds to activate the thermocouple, then adjust the flame. If the flame goes out accidentally, the safety device shuts off the gas within seconds; turn the knob off and wait at least one minute before relighting. Use flat-bottomed pans with lids and do not use pans that overhang the edge of the hob.
Cleaning and care
- Clean only when the hob has cooled down
- Do not leave vinegar, coffee, milk, salt water, tomato or lemon juice on the steel
- Pan supports and stainless parts darken after a few minutes of use; remove the discolouration with a mildly abrasive cloth
- Keep the shine by washing with warm soapy water; the manufacturer recommends regular use of a stainless steel cleaner
- Burner caps and heads can be removed without tools and washed in warm soapy water or in the dishwasher
- Do not use a steam cleaner; wipe the thermocouple gently with a damp sponge
Technical data
| Parameter | Value |
|---|---|
| Brand | Carbest |
| Manufacturer article no. | 70562 |
| Type | Surface-mounted gas hob |
| Burner layout | 2 burners one behind the other |
| Rated output | 1.8 kW + 1.0 kW = 2.8 kW |
| Reduced output | 0.5 kW per burner |
| Gas consumption | 204 g/h |
| Gas | LPG: propane G31, butane G30 |
| Gas pressure | 30 mbar (category I3B/P) |
| Flame failure device | Yes, thermoelectric |
| Ignition | Manual (match or lighter) |
| Material | Polished stainless steel, aluminium |
| Dimensions (W x D x H) | 290 x 440 x 95 mm |
| Gas connection | Smooth Ø 8 mm pipe |
| Weight | 2.5 kg |
| Scope of delivery | Hob, mounting material, user manual |
| EAN | 4043729176287 |
Other Carbest gas hobs from this series
- 2 burners, stainless steel, built-in (70561)
- 2 burners side by side, surface-mounted, stainless steel (70563)
- 1 burner, all black (70583)
- 1 burner, silver edge (70557)
- 2 burners side by side (70558)
- 2 burners one behind the other (70559)
Frequently asked questions
Does the hob have a flame failure device?
Yes. Each burner has a thermocouple that shuts off the gas a few seconds after the flame goes out.
Does it have piezo ignition?
No. Ignition is manual: press and turn the knob and light the burner with a match or an electric lighter.
Do I need a worktop cut-out?
Not for the whole hob, as this is a surface-mounted model with a 95 mm high housing. Only the gas supply to the inlet must be prepared according to the instructions.
Can I use it with 50 mbar or natural gas?
No. This model is designed for LPG at 30 mbar and conversion to another gas or pressure is not permitted.
Can I install it myself?
The manufacturer requires installation, gas connection and leak testing by a qualified fitter.








