EPEVER HP Series 60A 230VAC 3.5KW Inverter/Charger
ID produktu: 41826
Opis produktu
EPEVER HP Series 60A 230VAC 3.5KW Inverter/Charger
The HP Series 20A is an advanced hybrid inverter/charger, supporting multiple energy sources like utility, oil generator, and solar. It offers parallel operation, high reliability, and various charging modes. Featuring a large LCD screen and Modbus communication, it provides efficient energy management. With optimized MPPT technology and dual closed-loop control, it maximizes solar power utilization. This inverter ensures high-quality, stable, and reliable electricity for your needs.
With color LCD display, w/o WIFI built in. IP20 protection.
Utility input
Utility Voltage: 176VAC to 264VAC (Default)
Utility Voltage: 90VAC to 280VAC (Configurable)
Utility Frequency: 45Hz to 65Hz
Maximum Utility Charging Current: 60A
Switch Response Time – Inverter to Utility:: 10ms
Switch Response Time – Utility to Inverter (when the load power is higher than 100W):: 20ms
Inverter output
Inverter Rated Power (@30℃): 3500W
3-second Transient Surge Output Power: 7000W
Inverter Output Voltage: 220/230VAC±3%
Inverter Frequency: 50/60Hz±0.2%
Output Voltage Waveform: Pure sine wave
Load Power Factor: 0.2－1(VA ≤ Rated output power)
THDu (Total Harmonic Voltage Distortion): ≤3% (48V resistive load)
Maximum Load Efficiency: 0.92
Maximum Inverter Efficiency: 0.94
Parallel Function: Yes, 12 units in standard, 16 units at most
Solar controller
PV Maximum Open-circuit Voltage (At minimum operating environment temperature): 500V
PV Maximum Open-circuit Voltage (At 25℃): 440V
MPPT Voltage Range: 85V to 400V
PV Maximum Input Power: 4000W
MPPT Input Channels: One way
PV Maximum Input Current: One way, 13A
PV Maximum Short-circuit Current: One way, 15A
Battery
MPPT Maximum efficiency: ≥99.5%
Battery Rated Voltage: 48VDC
Others
Battery Maximum Charging Current: 60A
No-load Losses: <0.7A
Test condition: Utility, PV and Load are not connected, AC output is ON, fan stops, @48V input
Standby Current: <0.5A
Test condition: Utility, PV and Load are not connected, AC output is OFF, fan stops, @48V input
Work Temperature Range: -20℃ to +50℃ (When the environment temperature exceeds 30℃, the actual output power is reduced appropriately)
Storage Temperature Range: -25℃ to +60℃
Enclosure: IP20
Relative Humidity: < 95% (N.C.)
Altitude: <4000M (If the altitude exceeds 2000 meters, the actual output power is reduced appropriately)
Mechanical parameters:
Dimension (Length x Width x Height): 534mm × 288mm × 163mm
