Moog M10 Brake Rod Holder with Lock Nut, 17.5 cm - Brake Linkage Guide
- Moog M10 brake rod holder with lock nut, 17.5 cm. Stabilises the trailer brake rod.
The Moog M10 brake rod holder with lock nut stabilises the trailer brake rod. It is 17.5 cm long, black and weighs 40 g.

Role in the brake system
The brake rod runs from the overrun coupling to the compensator. The holder keeps it aligned so that it does not bend when braking, knock against the chassis or vibrate on bumps. A worn or cracked holder causes knocking and uneven braking.
The brake transmission
The brake transmission of a trailer consists of the rod from the overrun coupling, the compensator and two cables running to the wheels. Each of these parts must be securely fixed and correctly adjusted, because this decides whether both wheels brake evenly.
Fitment and fitting
Before ordering, compare the type of overrun coupling, axle or brake with the type plate and with the part you are replacing. Replace worn or corroded parts straight away, and after replacement adjust the wheel brakes and the overrun linkage. Brake and overrun parts have a direct effect on driving safety. If you have no experience repairing trailers, leave fitting and adjustment to a workshop. After any repair, check the brake on a short test drive.
Key data at a glance
| Feature | Value |
|---|---|
| Brand | Moog |
| Type | brake rod holder |
| Thread | M10 |
| Length | 17.5 cm |
| Colour | black |
| Weight | 40 g |
Questions and answers
How do I spot a worn holder?
By knocking under the trailer, play in the rod and rub marks on the chassis.
Does replacement need adjustment?
After replacement check and if needed adjust the brake linkage.





