Reich UniQuick 12 mm drain valve with two inlets - push-fit, for camper water systems
- Reich UniQuick drain valve with two inlets for 12 mm pipes. Fitted by pushing the pipe in, no screwing or gluing. Tight up to 6 bar at 80 °C, frost-resistant, made of drinking-water-approved material. For campers and caravans.
The Reich UniQuick drain valve with two inlets is fitted in the run of a water line in the UniQuick 12 mm push-fit pipe system. Water flows through the valve, and when you open the lever you can drain the system, for example before winter. Pipes are joined by simply pushing them in, with no screwing, gluing or welding.
Key information
- for UniQuick 12 mm system pipes
- 2 inlets - fitted in the run of the line
- push-fit, connections can be released and reused
- tight up to 6 bar at 80 °C
- material meets drinking water and food regulations, up to 90 °C
- frost-resistant, blue
- manufacturer art. no. 533-8252
Before you order
Fit the valve at the lowest point of the system so the lines drain fully when you winterise the camper or caravan. The rigid UniQuick pipe can be laid without kinks and without water pockets where water stays after draining. The one-inlet version suits the end of a line.
Related products
- Reich UniQuick 12 mm drain valve with one inlet
- Reich UniQuick cold water pipe 12 x 1.5 mm, 1 m
- Reich UniQuick hot water pipe 12 x 1.5 mm, 1 m
- Reich UniQuick quick connector
Technical data
| Parameter | Value |
|---|---|
| Brand | Reich |
| System | UniQuick 12 mm |
| Type | drain valve with lever |
| Inlets | 2 |
| Tightness | up to 6 bar at 80 °C |
| Material | plastic meeting drinking water regulations, up to 90 °C |
| Frost-resistant | yes |
| Colour | blue |
| Manufacturer art. no. | 533-8252 |
| EAN | 4037911331523 |
Questions and answers
Do the connections need gluing or screwing?
No. The UniQuick 12 mm pipe is pushed into the fitting, and the joint can be released and reused.
How does it differ from the one-inlet version?
The two-inlet version is fitted in the run of a line, the one-inlet version at its end.
What pressure does it take?
The manufacturer states it is tight up to 6 bar at 80 °C.
Is it suitable for drinking water?
Yes, the material meets drinking water and food regulations.
Manufacturer
Reich GmbH Regel- und Sicherheitstechnik, Ahornweg 37, 35713 Eschenburg, Germany.