Roxite 4.26 Polyplastic Hinged Window 700 x 300 mm, Grey with Screen Print - Double Acrylic Pane for Motorhome and Caravan
- Polyplastic Roxite 4.26 hinged window pane for a 700 x 300 mm opening. Grey double acrylic glazing with grey screen print and an aluminium hinge on the top edge. Sold without accessories.
Polyplastic Roxite 4.26 is an outward-opening hinged window pane for the side wall of a motorhome or caravan. This one fits a 700 x 300 mm mounting opening. The pane is double glazed grey acrylic with a grey screen print around the edge and an aluminium hinge built into the top edge. It is a replacement part for a damaged, scratched or faded pane in an existing Roxite window of the same series.

Key features
- Polyplastic Roxite 4.26 series (model code F26).
- Mounting opening 700 x 300 mm (width x height).
- Outer pane size approx. 755 x 370 mm.
- Double glazed grey acrylic.
- Grey screen print around the perimeter.
- Aluminium hinge built into the top edge.
- All four corners rounded.
- Pane only, without stay arms or other accessories.
How to check that the pane fits
Roxite windows are sized by the opening in the vehicle wall, not by the pane itself. The pane is larger than the opening because it overlaps the seal. Before ordering, check:
- Opening size: measure width and height with the window open, from seal to seal, and round up. For this pane the result should be 700 x 300 mm.
- Old pane size: if it is easier to measure the pane, it should be approx. 755 x 370 mm.
- Window series: the Roxite 4.26 or F26 marking is usually on the pane or on a sticker in the corner.
- Corner shape: all four corners of this pane are rounded.
- Colour and print: grey acrylic with a grey screen print around the edge.

Grey acrylic and screen print
The pane consists of two acrylic layers with an air gap between them. This reduces condensation on the inside and heat loss compared with a single sheet.
The grey tint darkens the interior on sunny days and makes it harder to see inside. The grey screen print around the perimeter hides the window edge and fixings, so the new pane looks the same as the original.
What is included and what to buy separately
The delivery includes only the pane with the hinge on its top edge. The stay arms that hold the window open are not included. Friction arms CP140 fit Polyplastic F26 series windows with a height of 300 mm:
- F48 arm CP140 right - friction arm with Polifix slide attachment, without handle, with locking knob, closed length of the metal part 140 mm
- F48 arm CP140 left - left version of the same arm
A 700 mm wide window usually has two arms: left and right. If your old arms are in good condition, you can move them to the new pane.
Replacing the pane step by step
- Open the window and support the pane so it does not drop.
- Unscrew or unclip the arms from the pane.
- Remove the old pane from the top hinge profile in the vehicle wall.
- Clean the profile and the seal around the opening.
- Fit the new pane onto the same hinge profile and check that it moves smoothly along its full width.
- Refit the arms and check that the window closes properly and presses evenly against the seal.
The hinge profile in the wall is specific to each window series, so a 4.26 pane will not replace a pane from another Roxite series, even with the same opening size.
Other Roxite 4.26 sizes
If your vehicle has windows of the same series in other sizes, you can find them here:
- Roxite 4.26, opening 600 x 550 mm, grey
- Roxite 4.26, opening 800 x 550 mm, grey
- Roxite 4.26, opening 1300 x 550 mm, grey
- Roxite 4.26, opening 500 x 550 mm, opaline (frosted)
- Roxite 4.26, opening 600 x 550 mm, opaline (frosted)
Specifications
| Parameter | Value |
|---|---|
| Manufacturer | Polyplastic |
| Series | Roxite 4.26 (F26) |
| Type | outward-opening hinged window pane |
| Mounting opening (W x H) | 700 x 300 mm |
| Outer pane size | approx. 755 x 370 mm |
| Material | acrylic, double glazed |
| Pane colour | grey |
| Screen print | grey, around the perimeter |
| Corners | 4 rounded |
| Hinge | aluminium, built into the top edge |
| Matching arms | CP140 right and left (sold separately) |
| Use | motorhome or caravan side wall |
| Included | 1 pane without accessories |
Frequently asked questions
Is 700 x 300 mm the size of the pane?
No. It is the size of the opening in the wall, measured with the window open from seal to seal. The pane itself is approx. 755 x 370 mm.
Are the arms and latches included?
No, you get the pane with the hinge on its top edge only. Right and left CP140 arms are available separately.
Will it fit a Roxite window of another series with the same opening?
Do not assume so. The hinge profile, corner shape and print differ between series. Check for the 4.26 or F26 marking on the old pane.
Is there a frosted version for the bathroom?
In the 4.26 series we offer opaline versions in 500 x 550 mm and 600 x 550 mm. In the 700 x 300 mm size we offer the grey pane.
Do I need to remove the window from the wall?
Usually not. The pane comes off the hinge profile with the window open, after the arms are detached. The frame and profile stay in the wall.
Manufacturer
Polyplastic B.V. (a Lippert brand), Thurledeweg 5, 3044 EN Rotterdam, Netherlands.













