Thule Awning Adapter for Hymer Exsis / Hymer Camp from 2012, Omnistor Series 5 and 8, 3 m
- Thule adapter 309986, 3 m long, for mounting a Thule Omnistor series 5 or 8 wall awning on a Hymer Exsis or Hymer Camp motorhome built from 2012. Net weight 7 kg.
The Thule 309986 adapter lets you mount a Thule Omnistor series 5 or 8 wall awning on a Hymer Exsis or Hymer Camp motorhome built from 2012. The side wall of these vehicles has a profile that the awning cassette does not sit flush against. The adapter is one long plate bolted to the wall, and the awning hangs on it. This version is 3 m long.
Key facts
- manufacturer: Thule, part number 309986
- for Hymer Exsis and Hymer Camp motorhomes built from 2012
- for Thule Omnistor series 5 and 8 wall awnings
- length 3000 mm
- 1 adapter plate included
- net weight 7 kg according to the manufacturer
Which vehicles and awnings
The adapter is designed for Hymer Exsis and Hymer Camp motorhomes built from 2012. Older vehicles of these ranges have a different wall shape and need a separate adapter.
It fits Thule Omnistor series 5 wall awnings, for example the Omnistor 5200, and series 8, for example the Omnistor 8000. The drawing shows the joint in cross-section: the adapter bolted to the vehicle wall and the awning cassette hung on its profile.
Choosing the length
The adapter comes in several lengths, from 2.6 to 6 m. The adapter length is matched to the awning length according to the Thule selection chart. This version is 3 m.
If your awning is shorter or longer, choose an adapter of a different length from the same range. Before ordering, check the model year of the vehicle in its registration document.
Fitting
- the adapter is bolted to the side wall of the vehicle and the awning hangs on its profile
- choose fixing points and fasteners according to the Thule fitting instructions for this adapter
- before drilling, check what is behind the inside of the wall: cables, cupboards, reinforcements
- seal the joints with the wall so that water cannot get inside it
- with a length of 3 m and a weight of 7 kg, fitting is easier with two people
It is best to have the awning and adapter fitted by a motorhome workshop experienced with Thule awnings.
Related products
- Thule adapter 2.6 m for Hymer Exsis / Hymer Camp from 2012 - shorter version of this adapter
- Thule adapter 3.5 m for Hymer Exsis / Hymer Camp from 2012 - longer version of this adapter
- Thule adapter 3 m for Hymer Exsis / Hymer Camp until 2011 - version for vehicles built until 2011
- Thule Omnistor 5200 awning 3 m, white - series 5 wall awning
Technical data
| Parameter | Value |
|---|---|
| Brand | Thule |
| Manufacturer part number | 309986 |
| EAN | 5415182044493 |
| Type | wall awning adapter |
| Vehicles | Hymer Exsis, Hymer Camp |
| Model year | from 2012 |
| Fits awnings | Thule Omnistor series 5 and series 8 |
| Length | 3000 mm |
| Adapter plates | 1 |
| Net weight | 7 kg |
| Vehicle type | motorhome |
Questions and answers
Does the adapter fit a 2010 Hymer Camp?
No. This adapter is for vehicles built from 2012. For Hymer Exsis and Hymer Camp built until 2011 there is a separate adapter, listed under Related products.
Which awnings does it fit?
Thule Omnistor series 5 and series 8 wall awnings, for example the Omnistor 5200 and Omnistor 8000.
Which adapter length should I choose?
The adapter length is matched to the awning length according to the Thule selection chart. This version is 3 m, and the same range includes shorter and longer versions.
How much does the adapter weigh?
According to the manufacturer, 7 kg net. With packaging the parcel weighs about 8 kg.
How is it shipped?
Because of its 3 m length, the adapter is shipped as a long parcel.
Manufacturer
Thule NV, Kortrijkstraat 343, 8930 Menen, Belgium.