Thule Awning Adapter for Hymer Exsis / Hymer Camp from 2012, Omnistor Series 5 and 8, 4.5 m
- Thule adapter 309989, 4.5 m long, for mounting a Thule Omnistor series 5 or 8 wall awning on a Hymer Exsis or Hymer Camp motorhome built from 2012. Net weight 8.5 kg.
The Thule 309989 adapter lets you mount a Thule Omnistor series 5 or 8 wall awning on a Hymer Exsis or Hymer Camp motorhome built from 2012. The side wall of these vehicles has a profile that the awning cassette does not sit flush against. The adapter is one long plate bolted to the wall, and the awning hangs on it. This version is 4.5 m long.
Key facts
- manufacturer: Thule, part number 309989
- for Hymer Exsis and Hymer Camp motorhomes built from 2012
- for Thule Omnistor series 5 and 8 wall awnings
- length 4500 mm
- 1 adapter plate included
- net weight 8.5 kg according to the manufacturer
Which vehicles and awnings
The adapter is designed for Hymer Exsis and Hymer Camp motorhomes built from 2012. Older vehicles of these ranges have a different wall shape and need a separate adapter.
It fits Thule Omnistor series 5 wall awnings, for example the Omnistor 5200, and series 8, for example the Omnistor 8000. The drawing shows the joint in cross-section: the adapter bolted to the vehicle wall and the awning cassette hung on its profile.
Choosing the length
The adapter comes in several lengths, from 2.6 to 6 m. The adapter length is matched to the awning length according to the Thule selection chart. This version is 4.5 m.
If your awning is shorter or longer, choose an adapter of a different length from the same range. Before ordering, check the model year of the vehicle in its registration document.
Fitting
- the adapter is bolted to the side wall of the vehicle and the awning hangs on its profile
- choose fixing points and fasteners according to the Thule fitting instructions for this adapter
- before drilling, check what is behind the inside of the wall: cables, cupboards, reinforcements
- seal the joints with the wall so that water cannot get inside it
- with a length of 4.5 m and a weight of 8.5 kg, fitting is easier with two people
It is best to have the awning and adapter fitted by a motorhome workshop experienced with Thule awnings.
Related products
- Thule adapter 4 m for Hymer Exsis / Hymer Camp from 2012 - shorter version of this adapter
- Thule adapter 5 m for Hymer Exsis / Hymer Camp from 2012 - longer version of this adapter
- Thule adapter 4.5 m for Hymer Exsis / Hymer Camp until 2011 - version for vehicles built until 2011
- Thule Omnistor 5200 awning 4.5 m, white - series 5 wall awning
- Thule Omnistor 8000 awning 4.5 m, white - series 8 wall awning
Technical data
| Parameter | Value |
|---|---|
| Brand | Thule |
| Manufacturer part number | 309989 |
| EAN | 5415182044523 |
| Type | wall awning adapter |
| Vehicles | Hymer Exsis, Hymer Camp |
| Model year | from 2012 |
| Fits awnings | Thule Omnistor series 5 and series 8 |
| Length | 4500 mm |
| Adapter plates | 1 |
| Net weight | 8.5 kg |
| Vehicle type | motorhome |
Questions and answers
Does the adapter fit a 2010 Hymer Camp?
No. This adapter is for vehicles built from 2012. For Hymer Exsis and Hymer Camp built until 2011 there is a separate adapter, listed under Related products.
Which awnings does it fit?
Thule Omnistor series 5 and series 8 wall awnings, for example the Omnistor 5200 and Omnistor 8000.
Which adapter length should I choose?
The adapter length is matched to the awning length according to the Thule selection chart. This version is 4.5 m, and the same range includes shorter and longer versions.
How much does the adapter weigh?
According to the manufacturer, 8.5 kg net. With packaging the parcel weighs about 10 kg.
How is it shipped?
Because of its 4.5 m length, the adapter is shipped as a long parcel.
Manufacturer
Thule NV, Kortrijkstraat 343, 8930 Menen, Belgium.