T-connector for 12 mm hose white - plastic barbed fitting for campervans and caravans
- White plastic T-connector for branching a hose with a 12 mm inner diameter. It has three barbed ends that you push the hose onto. Secure each joint with a clamp.
The T-connector for 12 mm hose is a simple white plastic fitting that splits one line into two. Each of the three ends has a barbed profile for hose with a 12 mm inner diameter. It works well for routing lines in a campervan, caravan, boat or workshop.
Key features
- T shape, three barbed ends
- for hose with a 12 mm inner diameter
- white plastic
- no special tools needed
- sold individually
Use
The T-connector lets you add a branch without extra adapters. Cut the hose where you want the branch, push both ends onto the fitting and connect the third section.
For example, you can take a line to a second outlet or split a drain into two directions.
Installation
Cut the hose end straight. Stiffer hose is easier to fit after briefly warming the end in warm water. Push the hose over the full length of the barb and secure each joint with a clamp sized for the outer diameter of the hose.
After fitting, check all joints for leaks.
- cut the hose straight
- push it over the whole barb
- fit a clamp on each end
- check for leaks
Other barbed fittings
Fittings of this type in other shapes and sizes:
- T-connector for 10 mm hose white
- 90° elbow for 12 mm hose white
- straight connector for 12 mm hose
- T-connector for 16 mm hose black
Technical data
| Parameter | Value |
|---|---|
| Type | T-connector, barbed fitting |
| Hose size | 12 mm (inner diameter) |
| Number of ends | 3 |
| Material | plastic |
| Colour | white |
| Quantity | 1 piece |
Questions and answers
How many hoses does it take?
Three: one supply line and two branches.
Which hose does it fit?
Hose with a 12 mm inner diameter.
Do I need clamps?
Yes. Secure each joint with a clamp sized for the outer diameter of the hose.
How do I fit a stiff hose more easily?
Warm the hose end in warm water so it becomes more flexible.
Manufacturer
Carbon Zorro Sp. z o.o., ul. Humańska 8, 02-789 Warszawa, Poland.