90° elbow for 12 mm hose white - plastic barbed angle fitting for campervans
- White plastic 90° elbow for hose with a 12 mm inner diameter. Its two barbed ends let you route a line at a right angle without kinking the hose.
The 90° elbow for 12 mm hose is a white plastic angle fitting with two barbed ends. You push hose with a 12 mm inner diameter onto each end. It lets you route a line at a right angle along a wall, inside a cabinet or through the floor without the hose kinking and blocking the flow.
Key features
- 90° angle, two barbed ends
- for hose with a 12 mm inner diameter
- white plastic
- prevents the hose from kinking at a bend
- sold individually
Use
A hose bent too tightly flattens and restricts the flow. The elbow takes the bend, so the hose stays straight up to the fitting.
It is useful where a line passes through a cabinet wall, at a tank connection and in tight spaces.
Installation
Cut the hose end straight. Stiffer hose is easier to fit after briefly warming the end in warm water. Push the hose over the full length of the barb and secure each joint with a clamp sized for the outer diameter of the hose.
After fitting, check all joints for leaks.
- cut the hose straight
- push it over the whole barb
- fit a clamp on each end
- check for leaks
Other barbed fittings
Fittings of this type in other shapes and sizes:
- 90° elbow for 10 mm hose
- 90° elbow for 16 mm hose
- straight connector for 12 mm hose
- T-connector for 12 mm hose white
Technical data
| Parameter | Value |
|---|---|
| Type | 90° elbow, barbed fitting |
| Hose size | 12 mm (inner diameter) |
| Number of ends | 2 |
| Material | plastic |
| Colour | white |
| Quantity | 1 piece |
Questions and answers
Does the elbow join two hose sections?
Yes. Both ends are barbed and have the same diameter.
Which hose does it fit?
Hose with a 12 mm inner diameter.
Do I need clamps?
Yes. Secure each joint with a clamp sized for the outer diameter of the hose.
How do I fit a stiff hose more easily?
Warm the hose end in warm water so it becomes more flexible.
Manufacturer
Carbon Zorro Sp. z o.o., ul. Humańska 8, 02-789 Warszawa, Poland.