Drinking water tank 112 l Aplast 700000607 for the right rear wheel arch, with outlet nozzle - Fiat Ducato, Jumper, Boxer from 2018, Sprinter, Transit
- The Aplast 112 l drinking water tank (700000607) is shaped to fit the right rear wheel arch of large panel vans. 125.3 x 29.0 x 67.0 cm, 8.5 kg, rotomoulded polyethylene.
The Aplast 112 l drinking water tank (700000607) is shaped to fit the right rear wheel arch of large panel vans. It uses the space above the wheel that usually stays empty in a camper conversion and holds 112 l of drinking water. Version with outlet nozzle.

What it is for
The tank stores drinking water in a motorhome built on a large panel van. It is rotomoulded from polyethylene for drinking water contact (DVGW W 270). The seamless construction is tight, durable and easy to keep clean. Mounting on the wheel arch uses the space above the wheel and keeps the floor free.

Key features
- Capacity 112 l
- Dimensions 125.3 x 29.0 x 67.0 cm (with the 10 cm outlet nozzle, total 77.0 cm)
- Own weight 8.5 kg (catalogue)
- Rotomoulded polyethylene for drinking water (DVGW W 270)
- Mounting: on the right rear wheel arch

Vehicle fit
According to the manufacturer catalogue the tank fits: Fiat Ducato, Citroën Jumper, Peugeot Boxer (from model year 2018), Mercedes Sprinter (from model year 2017), Ford Transit panel van (from model year 2013). Item 700000607 replaces the earlier number 700000600. The manufacturer introduced a new production technology; dimensions, capacity and intended use are unchanged. According to the catalogue this model also fits the Renault Master from model year 2010; a version without outlet nozzle (700000601) is also available. For vehicle models released after the catalogue, the manufacturer recommends confirming the fit before ordering.
Installation notes
Before installation check that there is room for the fixings, pipes and access to the inspection lid. A full tank weighs about 112 kg more than an empty one, so the mounting must carry this load on rough roads too. Have the tank installed by a camper conversion workshop.
Spare parts
- Lid, blue, 140 mm (700010150)
- Lid gasket, 120-140 mm (700010102)
- Drain plug for drinking water tank (700010204)
Variants of the 112 l wheel arch tank
| Model | Description |
|---|---|
| 112 l (700000607) - this card | right wheel arch, with outlet nozzle |
| 112 l (700000606) | left wheel arch, with outlet nozzle |
| 112 l (700000605) | left wheel arch, no outlet nozzle |
Technical data
| Parameter | Value |
|---|---|
| Type | Wheel arch drinking water tank |
| Capacity | 112 l |
| Dimensions (L x W x H) | 125.3 x 29.0 x 67.0 cm (with the 10 cm outlet nozzle, total 77.0 cm) |
| Own weight (catalogue) | 8.5 kg |
| Material | Polyethylene (DVGW W 270) |
| Mounting position | on the right rear wheel arch |
| Fits | Fiat Ducato, Citroën Jumper, Peugeot Boxer (from model year 2018), Mercedes Sprinter (from model year 2017), Ford Transit panel van (from model year 2013) |
| Manufacturer item no. | 700000607 |
FAQ
Which vehicles does it fit?
Fiat Ducato, Citroën Jumper, Peugeot Boxer (from model year 2018), Mercedes Sprinter (from model year 2017), Ford Transit panel van (from model year 2013).
How much does the empty tank weigh?
8.5 kg according to the catalogue.












