Drinking water tank 112 l Aplast 700000606 for the left rear wheel arch, with outlet nozzle - Fiat Ducato, Jumper, Boxer from 2018, Sprinter, Transit
- The Aplast 112 l drinking water tank (700000606) is shaped to fit the left rear wheel arch of large panel vans. 125.3 x 29.0 x 67.0 cm, 8.5 kg, rotomoulded polyethylene.
The Aplast 112 l drinking water tank (700000606) is shaped to fit the left rear wheel arch of large panel vans. It uses the space above the wheel that usually stays empty in a camper conversion and holds 112 l of drinking water. Version with outlet nozzle.

What it is for
The tank stores drinking water in a motorhome built on a large panel van. It is rotomoulded from polyethylene for drinking water contact (DVGW W 270). The seamless construction is tight, durable and easy to keep clean. Mounting on the wheel arch uses the space above the wheel and keeps the floor free.

Key features
- Capacity 112 l
- Dimensions 125.3 x 29.0 x 67.0 cm (with the 10 cm outlet nozzle, total 77.0 cm)
- Own weight 8.5 kg (catalogue)
- Rotomoulded polyethylene for drinking water (DVGW W 270)
- Mounting: on the left rear wheel arch

Vehicle fit
According to the manufacturer catalogue the tank fits: Fiat Ducato, Citroën Jumper, Peugeot Boxer (from model year 2018), Mercedes Sprinter (from model year 2017), Ford Transit panel van (from model year 2013). For vehicle models released after the catalogue, the manufacturer recommends confirming the fit before ordering.
Installation notes
Before installation check that there is room for the fixings, pipes and access to the inspection lid. A full tank weighs about 112 kg more than an empty one, so the mounting must carry this load on rough roads too. Have the tank installed by a camper conversion workshop.
Spare parts
- Lid, blue, 140 mm (700010150)
- Lid gasket, 120-140 mm (700010102)
- Drain plug for drinking water tank (700010204)
Variants of the 112 l wheel arch tank
| Model | Description |
|---|---|
| 112 l (700000607) | right wheel arch, with outlet nozzle |
| 112 l (700000606) - this card | left wheel arch, with outlet nozzle |
| 112 l (700000605) | left wheel arch, no outlet nozzle |
Technical data
| Parameter | Value |
|---|---|
| Type | Wheel arch drinking water tank |
| Capacity | 112 l |
| Dimensions (L x W x H) | 125.3 x 29.0 x 67.0 cm (with the 10 cm outlet nozzle, total 77.0 cm) |
| Own weight (catalogue) | 8.5 kg |
| Material | Polyethylene (DVGW W 270) |
| Mounting position | on the left rear wheel arch |
| Fits | Fiat Ducato, Citroën Jumper, Peugeot Boxer (from model year 2018), Mercedes Sprinter (from model year 2017), Ford Transit panel van (from model year 2013) |
| Manufacturer item no. | 700000606 |
FAQ
Which vehicles does it fit?
Fiat Ducato, Citroën Jumper, Peugeot Boxer (from model year 2018), Mercedes Sprinter (from model year 2017), Ford Transit panel van (from model year 2013).
How much does the empty tank weigh?
8.5 kg according to the catalogue.












