2-Way Ball Valve for 10 mm Hose - Small Shut-Off Tap for Thin Water Lines in Motorhomes, Caravans and Boats
- Ball valve with two hose barbs for 10 mm hose. Fit it into the line and shut off the water flow with a quarter turn of the lever. For motorhomes, caravans, boats and camper vans.
Fit the 2-way ball valve for 10 mm hose into a water line to shut off the flow whenever you need. It has two barbed ends for hose with a 10 mm inner diameter and a green lever. This size is for thin lines, for example between the pump and the tap, at a filter or on the drain of a small tank, where a valve for 13 mm hose would be too big.
Shut off the water in one move
- two barbed ends for hose with a 10 mm inner diameter
- ball valve, opened and closed with a 90° turn of the lever
- green lever, position visible at a glance
- lightweight plastic body
- fits into the line without threads, hose clamps are enough
The valve has no threads, so you can fit it anywhere in an existing hose: cut the hose and push both ends over the valve barbs. You need no PTFE tape and no spanner.
How a ball valve works
Inside the valve body there is a ball with a bore. When the lever is in line with the valve, the bore lines up with the channel and water flows freely. Turning the lever by 90° sets the ball across the channel and shuts off the flow completely. You close the valve with one movement and can see at a glance from the lever whether it is open or closed.
Where it works well
- line from the pump to the tap or shower in a motorhome
- shutting off the supply to a filter while you change the cartridge
- drain of a small tank or canister with 10 mm hose
- shutting off part of the system for repairs
- water systems on boats and in small camper van conversions
Installation
- Use a hose with an inner diameter of 10 mm.
- Cut the hose square and push it over the whole length of the barbed end.
- Secure every joint with a hose clamp.
- Position the valve so that the lever is easy to reach and does not catch on the interior.
- After installation fill the system and check for leaks with the valve open and closed.
Winter storage
Before winter drain the water from the system and leave the valve open so that no water stays in the body. Frozen water can crack plastic parts. After the season it is also worth turning the lever a few times so that the ball does not stick in one position.
Choosing the size
What matters most is the inner diameter of the hose. This valve fits 10 mm hose. The same valve type is also available for 13 mm and 20 mm hose. If you want to screw the valve onto a threaded outlet, pick the model with a ring nut and one hose barb, and to switch water between two lines choose the 3-way L-port valve.
Matching parts
- 2-way ball valve for 13 mm hose - two hose barbs
- 2-way ball valve for 20 mm hose - for thicker hoses
- Ball valve with 1/2" ring nut and 13 mm hose barb - mounts on a 1/2" thread
- Ball valve with 3/4" ring nut and 13 mm hose barb - version for a 3/4" thread
- Ball valve with 1/2" ring nut and 16 mm hose barb - 1/2" thread and 16 mm hose
- Ball valve with 1/2" ring nut and 20 mm hose barb - 1/2" thread and 20 mm hose
- 3-way L-port ball valve with 1/2" female thread - switches water between two outlets
Technical data
| Parameter | Value |
|---|---|
| Type | 2-way ball valve (straight through) |
| Connections | 2 x hose barb |
| Hose size | 10 mm (inner diameter) |
| Operation | lever, 90° turn |
| Lever colour | green |
| Body material | plastic |
| Use | water systems in motorhomes, caravans and boats |
Frequently asked questions
Which hose does this valve fit?
Hose with an inner diameter of 10 mm. Push the hose over the barbed end and secure it with a hose clamp.
How do I know if the valve is closed?
From the lever position. When the lever is in line with the valve, water flows. When it is across the valve, the flow is shut off.
Can I screw it onto a thread?
No, this model has two hose barbs. To mount it on a thread choose the valve with a ring nut and one hose barb.
Do I need hose clamps?
Yes, we recommend them on every joint. A clamp stops the hose from slipping off and leaking, especially while driving.
What should I do with the valve before winter?
Drain the system and leave the valve open. This way no water stays in the body that could freeze.
Manufacturer
Carbon Zorro Sp. z o.o., ul. Humańska 8, 02-789 Warszawa, Poland.