Dometic PerfectView CAM 44 NAV twin reversing camera - silver, 140/50°, IP68, for motorhome and caravan
- Dometic PerfectView CAM 44 NAV is a silver twin camera with 140° and 50° lenses, motorised shutter, 20 m cable and NAV adapter. IP68, 12 V, for motorhomes and caravans.
Dometic PerfectView CAM 44 NAV is a colour twin camera in silver (catalogue number 9600000044). One aluminium housing holds two separate lenses: a close-range wide-angle (about 140° diagonal) and a long-range lens (about 50°). According to the Dometic product page the set includes the camera, a 20 m system cable, a NAV adapter box, installation material and a manual. The adapter helps connect the camera to navigation and multimedia systems. Protection class IP68, supply 12 V DC.

Key features
- PerfectView CAM 44 NAV colour twin camera, silver
- close-range lens about 140° diagonal and long-range about 50°
- NAV adapter for navigation and multimedia systems
- three distance markers in reverse mode
- microphone and IR LEDs for night use
- motorised cover for the close-range lens
- anodised and powder-coated aluminium housing
- IP68, 12 V DC supply (12-16 V working range per CAM44 manual)
- scope of delivery: 20 m system cable, NAV adapter box, installation material, manual
What it is for
CAM 44 NAV watches the area behind the vehicle while manoeuvring and parking. The close-range lens shows the zone just behind the rear wall, while the long-range lens gives a view similar to looking through a rear window - you can also switch it on outside reverse gear.
The NAV version differs from the basic CAM44 by including an adapter box for navigation and multimedia systems, so you can connect more easily to an existing navigation display when connectors and the video signal match the manuals.
The camera is intended mainly for vehicles. In practice it is fitted on a motorhome, van or caravan when you need a permanent rear view for pitching up or avoiding obstacles. Image and sound travel by cable to a colour monitor; the camera leaves the factory with a mirrored image, so the monitor must use a normal (non-mirrored) picture mode.
Installation notes
- Fit the camera bracket on the rear wall or crossmember as described in the CAM44 manual, using the insulating pad supplied.
- Route the 20 m system cable to the cab so it cannot rub on sharp edges or collide with moving parts.
- Connect the camera via the NAV adapter box to the navigation system or a PerfectView monitor and to 12 V DC as shown in the wiring diagram. Power draw per the CAM44 manual is max. 4 W.
- For electrical tests use a diode test lamp - a filament lamp can pull the circuit voltage down.
- After fitting, check lens switching, cover movement, NAV adapter operation and the three distance markers on screen in reverse.
What is in the box
- PerfectView CAM 44 NAV camera with motorised cover (silver).
- 20 m system cable.
- NAV adapter box for navigation and multimedia systems.
- Installation material and manual.
CAM 44 NAV versus other PerfectView cameras
CAM 44 NAV combines two separate lenses in one compact housing and adds a NAV adapter. If you do not need the adapter, choose the silver CAM44. For white bodywork pick the white CAM 44. Newer dual-view cameras from the CAM 440 line are listed as separate PerfectView products.
Safe use
- A reversing system is only an aid. It does not replace care when reversing or checking the mirrors.
- Operating temperature per the product page: -30 to +70°C.
- The housing is IP68, but seal mounting holes only as the manual describes.
- Do not use longer cover screws than specified - overlong screws damage the camera.
- Match the NAV adapter connectors to your navigation system using both manuals.
Care
Wipe the lenses and cover with a soft, damp cloth and no aggressive solvents. After washing the vehicle, check that the motorised cover opens and closes freely.
Related products
- Dometic PerfectView CAM44 - same twin camera without NAV adapter, silver
- PerfectView CAM 44 white - twin camera in white housing
- Dometic PerfectView M 75L AHD - 7" LCD monitor from the PerfectView range
- PerfectView RV-ADAPT 1 - adapter for older WAECO CRT systems
- PerfectView CAM 440 - newer PerfectView dual-view camera
Technical data
| Parameter | Value |
|---|---|
| Producer / model | Dometic PerfectView CAM 44 NAV |
| Catalogue number | 9600000044 |
| Colour | silver |
| Type | colour twin camera with NAV adapter |
| Long-range sensor | 1/4" Color CMOS, about 290,000 px |
| Close-range sensor | 1/3" CMOS, 762 x 504 |
| Video standard | PAL |
| Close-range viewing angle | about 140° diagonal |
| Long-range viewing angle | about 50° |
| Sensitivity | < 1 lux; 0 lux with IR LED (close-range) |
| Cover | motorised, close-range lens |
| Distance markers | 3 lines in reverse mode |
| Housing | anodised and powder-coated aluminium |
| IP class | IP68 |
| Supply | 12 V DC (12-16 V range per manual) |
| Power consumption | max. 4 W |
| Dimensions (W x H x D) | 114 x 74 x 65 mm |
| Net weight (producer) | about 0.4 kg |
| Cable in the set | 20 m |
| Adapter | NAV box for navigation and multimedia |
| Operating temperature | -30 to +70°C |
FAQ
How does CAM 44 NAV differ from CAM44?
It is the same twin-camera family with 140°/50° lenses. The NAV version adds an adapter box for navigation and multimedia systems.
One lens or two?
Two separate lenses in one housing: a close-range wide-angle and a long-range lens. You switch them manually or automatically.
What does the motorised cover do?
It protects the close-range lens from dirt and damage when you are not reversing. Long-range view remains possible through an aperture in the cover.
What supply is required?
12 V DC. The CAM44 manual states a 12-16 V working range and max. 4 W consumption.
Can I connect it to any navigation system?
The NAV adapter helps the link to navigation and multimedia systems. Always check connectors, PAL video standard and picture mode against both manuals.
What is in the box?
Per the Dometic product page: camera, 20 m system cable, NAV adapter box, installation material and manual.
Manufacturer
Dometic Germany GmbH, Hollefeldstrasse 63, 48282 Emsdetten, Germany.





