Dometic PerfectView CAM360 CS-HD cable set - 5/10/10/20 m, M8 IP67 connectors, for CAM360 system
- Dometic PerfectView CAM360 CS-HD is a cable set with 1x5 m, 2x10 m and 1x20 m leads and M8 IP67 connectors for the CAM360 AHDHD system. For motorhome and caravan.
Dometic PerfectView CAM360 CS-HD is a camera cable set for the CAM360 AHDHD system (catalogue number 9620013232). Per the Dometic product page the kit includes 1 x 5 m (front), 2 x 10 m (left/right) and 1 x 20 m (rear). The connectors are small, watertight M8 screw types (IP67), matched to the CAM360 cameras. The camera system itself is sold without these cables.
Key features
- PerfectView CAM360 CS-HD set for the CAM360 AHDHD system
- 1 x 5 m (front), 2 x 10 m (left/right), 1 x 20 m (rear)
- watertight M8 screw connectors, IP67
- suited to cable routing in motorhomes and caravans
- net weight per producer about 1.80 kg
- camera cables only - no host and no cameras
What it is for
CAM360 CS-HD links the four CAM360 AHDHD cameras to the host. The different lengths make routing easier: a short cable at the front, medium ones on the sides and the longest at the rear.
Without this set (or other cables matching the manual) you cannot connect the cameras to the host - the CAM360 AHDHD carton does not include them.
The set is intended for vehicles with a PerfectView CAM360 system. In practice that means motorhomes, vans and caravans fitted with the surround AVMS.
Installation notes
- Assign the cables by side: 5 m to the front camera, 10 m to left and right, 20 m to the rear - as on the Dometic product page.
- Route the runs away from sharp edges, moving parts and hot exhaust components.
- Tighten the M8 connectors as described in the CAM360 manual; seal body penetrations.
- Do not extend the cables contrary to the manual or mix them with unchecked adapters.
- After connection, check the image from each camera before calibrating the 360° system.
What is in the box
- 5 m camera cable (front).
- Two 10 m camera cables (left and right).
- 20 m camera cable (rear).
- M8 IP67 screw connectors on the cables.
CS-HD versus the CAM360 system
CS-HD is the cable set only. Cameras and host come as CAM360 AHDHD. For viewing you still need an AHD monitor such as M 75L AHD. Twin cameras CAM44 / CAM 440 have their own cables in their camera kits and do not replace this set.
Safe use
- A damaged or leaking cable can cut the image or let moisture into the connector - check condition after fitting and after the season.
- M8 connectors are IP67 only when correctly tightened and sealed as the manual describes.
- Do not pull on the cable when disconnecting a plug - grip the connector housing.
- Route cables so they do not block doors, an awning or external lockers.
Care
Keep the connectors clean. After washing the vehicle, check that the M8 housings are tight and dry. Do not use aggressive solvents on the cable insulation.
Related products
- PerfectView CAM360 AHDHD - 360° camera system (4 cameras + host) this cable set belongs to
- Dometic PerfectView M 75L AHD - 7" AHD LCD monitor from the PerfectView range
- PerfectView RV-ADAPT 1 - adapter for older WAECO CRT systems
- PerfectView CAM44 - PerfectView twin reversing camera
- PerfectView CAM 440 - PerfectView dual-view camera
Technical data
| Parameter | Value |
|---|---|
| Producer / model | Dometic PerfectView CAM360 CS-HD |
| Catalogue number | 9620013232 |
| Type | camera cable set for CAM360 AHDHD |
| Lengths | 1 x 5 m, 2 x 10 m, 1 x 20 m |
| Length assignment | 5 m front; 10 m left/right; 20 m rear |
| Connectors | M8 screw type, IP67 |
| Net weight (producer) | about 1.80 kg |
| Parcel weight (producer) | about 2.0 kg |
| Application | PerfectView CAM360 AHDHD system |
FAQ
Does the CAM360 AHDHD kit already include these cables?
No. The Dometic page for CAM360 AHDHD lists 4 cameras + host, without system cables. You buy CS-HD separately.
Which lengths are in the box?
1 x 5 m (front), 2 x 10 m (left/right) and 1 x 20 m (rear).
What connectors do the cables use?
Small, watertight M8 screw connectors rated IP67, matched to the CAM360 cameras.
Do they fit CAM44?
No. These cables are for the CAM360 AHDHD system. CAM44 has its own system cable in the camera kit.
How much does the set weigh?
Per the Dometic page the net weight is about 1.80 kg.
Manufacturer
Dometic Germany GmbH, Hollefeldstrasse 63, 48282 Emsdetten, Germany.