GOK gas hose RST 8 x RST 8, 400 mm, PS 10 bar - 8 mm pipe stubs, brass fittings
- GOK rubber gas hose with 8 mm pipe stubs at both ends, length 400 mm. Pressure PS 10 bar, brass connections, stainless steel ferrules, cold resistant down to -30°C. DVGW type examination certificate.
GOK 04-441-00 is a rubber gas hose with a textile insert and an 8 mm pipe stub (RST 8) at both ends. It connects fittings, gas appliances and pipework, for example in a motorhome or caravan. The hose is 400 mm long and rated for PS 10 bar.
Key information
- connections: RST 8 pipe stub x RST 8 pipe stub
- length: 400 mm
- maximum allowable pressure: PS 10 bar
- hose: rubber with textile insert, 6.3 x 3.5 mm
- brass connections, stainless steel ferrules, corrosion resistant design
- cold resistant down to -30°C
- DVGW type examination certificate
- tag showing the replacement year
Before you order
An RST 8 connection is a plain 8 mm pipe stub. It goes into an 8 mm cutting ring fitting (RVS 8), for example on a regulator outlet, a valve or an appliance inlet, and is held by that fitting's nut. Before ordering, measure the distance between the connection points and choose a length that leaves the hose neither stretched nor sharply bent. The same GOK hose comes in several lengths. After fitting, check the joints for leaks and replace the hose no later than the year shown on the tag.
Related products
- GOK gas hose RST 8 x RST 8, 600 mm
- GOK gas hose RST 8 x RST 8, 800 mm
- GOK gas hose RST 8 x RST 8, 1000 mm
- GOK RVS 8 x RVS 8 union with cutting ring
Technical data
| Parameter | Value |
|---|---|
| Manufacturer | GOK |
| GOK catalogue number | 04-441-00 |
| Connection A | RST 8 pipe stub (8 mm) |
| Connection B | RST 8 pipe stub (8 mm) |
| Length | 400 mm |
| Maximum pressure | PS 10 bar |
| Hose | rubber with textile insert |
| Hose size | 6.3 x 3.5 mm |
| Connections | brass |
| Ferrules | stainless steel |
| Cold resistance | down to -30°C |
| Compliance | DVGW type examination certificate |
Questions and answers
What does RST 8 mean?
It is an 8 mm pipe stub. It fits into an 8 mm cutting ring fitting, just like 8 mm gas pipe.
Are other lengths available?
Yes, this GOK RST 8 x RST 8 hose is made in 400, 600, 800 and 1000 mm lengths.
When should the hose be replaced?
The hose has a tag with its replacement year. Replace it by that year at the latest, or earlier if the rubber is cracked or damaged.
Can the hose handle frost?
Yes, the manufacturer states cold resistance down to -30°C.
Manufacturer
GOK Regler- und Armaturen-Gesellschaft mbH & Co. KG, Obernbreiter Straße 2-18, 97340 Marktbreit, Germany.