LILIE native cold drinking water hose 10 x 18 mm 5 m - braided, white with blue stripe
- LILIE native 10 x 18 mm hose for cold drinking water, 5 m length. It is made of braided TPU without PVC, withstands 16 bar at 20°C and 14 bar at 40°C and does not kink at bends.
The LILIE native 10 x 18 mm hose is a line for cold drinking water in campervans, caravans and boats. It is made of thermoplastic polyurethane (TPU) with an embedded textile braid, contains no PVC and does not give the water any odour or taste. The white colour with a blue stripe makes it easy to tell the cold line from the hot line.
Key features
- inner diameter 10 mm, outer diameter 18 mm, wall 4 mm
- TPU (LM T108) with textile braid, PVC-free
- working pressure 16 bar at 20°C, 14 bar at 40°C
- burst pressure 48 bar at 20°C
- temperature range -30 to +95°C
- certified for cold drinking water to DIN 2001-2 up to +23°C
- tested to KTW and DVGW W270
One continuous 5 m length.
Why a braided hose
The textile braid inside the wall keeps the hose in shape under high pressure and stops it from kinking at bends. The minimum bend radius is 35 mm, so the line can be routed tightly in cabinets and under the floor without extra elbows.
The 4 mm wall dampens noise and vibration from the diaphragm pump, which you will appreciate at night. The material is odour and taste neutral and limits algae and germ growth in the system.
For cold water
The hose is certified for cold drinking water to DIN 2001-2 up to +23°C. At 40°C it still withstands 14 bar, which leaves a large margin for a typical campervan pump. For the hot water line, choose the version with the red stripe.
The hose has been tested to KTW and DVGW W270 and passed the DVGW VP549 type test for temporary drinking water transport. It is printed along its full length with LILIE native - KTW/DVGW - W270.
Installation
Cut the hose square, ideally with a hose cutter. Push it fully onto the barbed end of a 10 mm fitting and secure it with an 18 mm spring band clamp. LILIE WeißGELB fittings are dimensioned to match LILIE native hoses.
After fitting, check for leaks under pressure and flush the system. Before winter, drain the water so that freezing water cannot damage the pump and fittings.
Other lengths and versions
The same hose is also available in other lengths:
- LILIE native hot drinking water hose 10 x 18 mm, 5 m - red stripe
- the same hose in a 10 m length
- the same hose in a 50 m length
Matching fittings and clamps
10 mm fittings and 18 mm clamps fit the 10 x 18 mm hose:
- LILIE WeißGELB T-connector 10 mm - branching
- LILIE WeißGELB 90° elbow 10 mm - change of direction
- LILIE 90° pump elbow 1/2" for 10 mm hose - pump connection
- LILIE spring band clamp 18 mm (17.5-19 mm) - securing the joints
Technical data
| Parameter | Value |
|---|---|
| Brand | LILIE |
| Use | cold drinking water |
| Inner diameter | 10 mm |
| Outer diameter | 18 mm |
| Wall thickness | 4 mm |
| Length | 5 m |
| Material | TPU (LM T108) with textile braid, PVC-free |
| Working pressure | 16 bar at 20°C, 14 bar at 40°C |
| Burst pressure | 48 bar at 20°C |
| Temperature range | -30 to +95°C |
| Minimum bend radius | 35 mm |
| Colour | white with blue stripe |
| Drinking water | DIN 2001-2, up to +23°C |
| Tests | KTW, DVGW W270, DVGW VP549 |
| Weight | 800 g |
| EAN | 4041431174164 |
Questions and answers
Which fittings fit this hose?
Fittings with a barbed end for 10 mm hose, for example from the LILIE WeißGELB series. Secure the joint with an 18 mm spring band clamp.
Can I use this hose for hot water?
The version with the red stripe is intended for hot water. This version is certified for cold drinking water up to +23°C.
Does the hose kink?
The textile braid and the 4 mm wall protect it from kinking. The minimum bend radius is 35 mm.
Is the hose suitable for drinking water?
Yes. It is certified to DIN 2001-2 and tested to KTW and DVGW W270.
Can I order a longer length?
Yes. The same hose is available in 10 m and 50 m lengths.
Manufacturer
Lilie GmbH & Co. KG, Heinrich-Hertz-Straße 30, 74354 Besigheim, Germany.