LILIE
(Products quantity: 242)LILIE is a German brand best known for onboard water systems and practical equipment for motorhomes, caravans and camper vans. At Carbon Zorro you can find its Pressure Pumps, including diaphragm models from the IQflo®, SMARTSERIE™, CLASSICSERIE™ and SOFTSERIE® lines, along with tank-related solutions such as Ultraheat, Certec® Inline, WeißGELB® and GrauGELB®.
The range also covers components for fresh and waste water setups, including Valves & Solenoid Valves, drain systems and Water Filters for drinking water use. The brand’s offer is completed by SPL25 and SPL105 solar modules and the LSR 40M controller for self-sufficient onboard installations.


LILIE GrauGELB electric ball valve 40 mm XL 12 V with position indicator - grey water drain, 855 mm² flow


LILIE Classic Serie LP403 diaphragm water pump 12 V, 10.6 l/min, 2.1 bar - self-priming, for drinking water, motorhome and caravan


LILIE Frostwächter water tank heater 24 V 30 W with thermostat - frost protection for over 40 l of water
LILIE
LILIE is best known for components used in onboard fresh water and grey water systems. The range visible here covers both core installation parts and more specific products such as LP1001 SMARTSERIE™, IQflo® 11.1, LP061 Whisper King CLASSICSERIE™, LP4142 SOFTSERIE® and LP403 CLASSICSERIE™ diaphragm pumps. It also includes Lilie GrauGELB® and WeißGELB® drain systems and valves, Certec® Inline filter parts, plus accessories for tanks, pipe heating and water handling. This makes the brand relevant both for building a complete leisure vehicle water setup and for replacing a single worn component.
Main product groups
- Pressure Pumps
- Valves & Solenoid Valves
- Water Tank Accessories
- Fresh Water Hoses & Pipes
- Water Filters
- Solar Charge Controllers MPPT & PWM
How to choose the right LILIE component
Start with the job the part has to do and the section of the system where it will be installed. For pumps, compare operating pressure and flow rate carefully - models in this range include 1.4 bar, 1.9 bar, 2.1 bar, 2.4 bar and 4.5 bar versions, with outputs from 7 l/min to 14 l/min across CLASSICSERIE™, SOFTSERIE™, SMARTSERIE™ and IQflo®. For valves and drain parts, check the connection size and flow cross section, for example 1", 1 1/4", 1 1/2", ø 40 mm, 490 mm², 530 mm² or 855 mm², so the part matches the existing plumbing. If you are working on water quality or winter protection, look at Certec® Inline filter products, Ultraheat tank heating films in 38W, 55W, 89W and 91W versions, and heating tape for frozen pipes and valves.





































