Tripus UK200 Wheel Chock Black, Polyethylene, Axle Load up to 1600 kg, for Trailers and Caravans - Wheel Chock to §41 StVZO
- Tripus UK200 wheel chock in black, polyethylene. Axle load up to 1600 kg, wheel load up to 800 kg, tyre radius up to 295 mm. Meets the §41 StVZO requirement for trailers.
The Tripus UK200 wheel chock in black stops a parked trailer or caravan from rolling away on its own. Made of polyethylene, it is rated for vehicles with an axle load of up to 1600 kg (wheel load up to 800 kg) and a static tyre radius of up to 295 mm. At around 216 g it fits easily into a locker and is quickly placed at the wheel.

What a wheel chock is for
A chock placed at the wheel takes up the force that would make the vehicle roll down a slope and relieves the parking brake. Under §41 StVZO, trailers with a permitted total weight above 750 kg must carry two wheel chocks. One Tripus UK200 chock secures one wheel, so a single-axle trailer needs two of them.
- Car and luggage trailers
- Boat trailers
- Caravans
- Catering and sales trailers
- Parking on slopes and on campsites

Design and manufacturer data
The curved face sits against the tyre and the ribbed underside keeps the chock rigid while keeping weight low. According to the manufacturer, the downhill force on one chock at an 18% gradient may be up to 574 daN. The chock measures about 224 x 90 x 100 mm. The black colour hides tyre marks and mud well.
- Polyethylene, light and rigid
- Axle load up to 1600 kg, wheel load up to 800 kg
- Tyres with a static radius of up to 295 mm
- TÜV tested
How to place the chock correctly
- Apply the trailer parking brake.
- Push the chock against the tyre on the downhill side so that the curve rests on the tread.
- On a slope use two chocks, one at each wheel of the same axle.
- Before driving off, free the chock by moving the trailer slightly and remove it.
A fixed place in the holder
The matching Tripus holder in black screws onto the frame, drawbar or locker wall. The chock slides in and is held by a snap catch, so it stays put while driving and does not go missing. The holder is not part of this offer.
Key data at a glance
| Feature | Value |
|---|---|
| Brand | Tripus |
| Type | wheel chock |
| Model | UK200 |
| Colour | black |
| Material | polyethylene |
| Permitted axle load | 1600 kg |
| Wheel load | up to 800 kg |
| Static tyre radius | up to 295 mm |
| Downhill force per chock at 18% gradient | max. 574 daN |
| Dimensions (L x W x H) | approx. 224 x 90 x 100 mm |
| Weight | approx. 216 g |
| Testing | TÜV |
| Quantity | 1 chock |
Questions and answers
How many chocks does a trailer need?
Under §41 StVZO a trailer with a permitted total weight above 750 kg must carry two chocks. One chock secures one wheel.
What vehicle weight is the chock suitable for?
For vehicles with an axle load of up to 1600 kg, which means up to 800 kg per wheel, and tyres with a static radius of up to 295 mm.
Can I use it on a motorhome?
Only if the axle load at the wheel you secure does not exceed 1600 kg. Many 3.5 t motorhomes have a higher rear axle load, so check the vehicle registration papers.
Is the holder included?
No, this offer covers one chock. The matching Tripus holder is available as a separate product.







