Dometic PerfectView M 75L AHD LCD monitor 7" - AHD, 3 camera inputs, 12/24 V, for motorhome and caravan
- Dometic PerfectView M 75L AHD is a 7" digital LCD monitor with AHD technology, LED backlighting and three camera inputs. 12/24 V, IP40, for motorhomes and caravans.
Dometic PerfectView M 75L AHD is a 7" digital LCD monitor (approx. 17.8 cm) with Analog High Definition (AHD) technology and bright LED backlighting (catalogue number 9600012898). The flat screen is the core of many PerfectView rear-view systems: you can connect up to three cameras, save separate picture settings for each input and enable automatic trailer-camera recognition. Supply 12/24 V DC (operating range 12-30 V per the manual), protection class IP40, net weight approx. 0.4 kg. The pack includes the monitor, stand, connection cable, installation mat and manual.
Key features
- PerfectView M 75L AHD 7" digital LCD monitor, black
- AHD technology and LED backlighting, brightness approx. 800 cd/m2
- display resolution > 600,000 px
- up to three cameras, separate picture settings per input
- automatic trailer camera recognition
- mirror mode set separately for each camera
- automatic dimming by ambient light sensor
- elegant stand with concealed cable routing
- 12/24 V DC supply (12-30 V per the manual), power consumption max. 10 W
- dimensions 190 x 110 x 26 mm, net weight approx. 0.4 kg
- monitor, stand, cable, installation mat and manual in the pack
What it is for
M 75L AHD shows the picture from reversing cameras and other video sources in the cab. When you manoeuvre or park it gives a permanent view of the space behind the vehicle, and with several cameras it lets you switch between side and rear views.
The monitor is intended primarily for vehicles. In practice it is fitted in motorhomes, camper vans and caravans when you need a bright, high-contrast AHD picture for pitching, hitching or avoiding obstacles.
You can set a normal or mirrored picture separately for each camera so left and right on the screen match what you expect from a rear-view mirror or a camera view.
Installation notes
- Fit the monitor stand where the driver can see it clearly, using the supplied installation mat and following the vehicle instructions.
- Route the connection cable so it cannot chafe on sharp edges and does not foul airbags or moving parts.
- Connect the 12/24 V DC supply and PerfectView cameras as shown in the wiring diagram. Monitor consumption is max. 10 W; allow for higher current when cameras run heaters.
- Set picture mode (normal / mirrored) separately for each camera input and check trailer-camera recognition if you use a trailer camera.
- After fitting, check camera switching, day/night brightness and readability in daylight.
Scope of delivery
- PerfectView M 75L AHD monitor.
- Stand (ball mount).
- Connection cable.
- Installation mat and manual.
M 75L AHD versus other PerfectView monitors
M 75L AHD has a 7" screen and brightness of approx. 800 cd/m2. If you need a more compact display from the same AHD series, M 55L AHD (5") is the matching option. Match PerfectView AHD cameras using Dometic compatibility notes and both manuals.
Safe use
- A rear-view system is only an aid. It does not replace careful reversing or mirror checks.
- Operating temperature: -20 to +70°C. Storage: -30 to +70°C.
- IP40 covers cabin use - do not mount the monitor outside the vehicle.
- ECE R10 approval covers the device; road-traffic rules still apply.
- Do not block the field of view or airbags with the monitor stand.
Care
Wipe the screen with a soft, damp cloth without aggressive solvents or sharp objects. Disconnect the supply before cleaning to avoid short circuits. Keep connectors dry and clean. For long idle periods, isolate the supply as described for your vehicle.
Related products
- Dometic PerfectView CAM44 - twin camera 140/50° from the PerfectView range
- Dometic PerfectView M 55L AHD - smaller 5" LCD monitor from the same AHD series
- PerfectView CAM 80 AHD - compact AHD shutter camera 120°
- PerfectView CAM 35 2.0 - brake-light console camera
Technical data
| Parameter | Value |
|---|---|
| Brand / model | Dometic PerfectView M 75L AHD |
| Catalogue number | 9600012898 |
| EAN | 4015704272659 |
| Colour | black |
| Type | digital LCD monitor with AHD technology |
| Screen size | 7" (17.8 cm) |
| Brightness | approx. 800 cd/m2 |
| Display resolution | > 600,000 px |
| Video standard | 1080p30 / 1080p25 / 720p30 / 720p25 / PAL / NTSC (auto) |
| Camera inputs | up to 3 |
| Mirror mode | set separately for each camera |
| Dimming | automatic (ambient light sensor) |
| IP class | IP40 |
| Supply | 12/24 V DC (range 12-30 V) |
| Power consumption | max. 10 W |
| Dimensions (W x H x D) | 190 x 110 x 26 mm |
| Net weight (manufacturer) | approx. 0.4 kg (400 g) |
| Operating temperature | -20 to +70°C |
| Vibration resistance | 6 g |
| Approval | ECE R10 |
| Scope of delivery | monitor, stand, cable, mat, manual |
FAQ
How many cameras can I connect?
Up to three. Each input has separate picture settings, including normal or mirrored mode.
What does AHD mean on this monitor?
Analog High Definition is the video transmission standard used with PerfectView cameras. Together with LED backlighting it gives a bright, high-contrast picture day and night.
What power supply is required?
12/24 V DC. The manual states an operating range of 12-30 V and a maximum consumption of 10 W.
Is the monitor waterproof?
No. IP40 covers cabin use. Do not mount it outside the vehicle.
Does it work with PerfectView cameras?
Yes, it is the core of many PerfectView rear-view systems. On the product page Dometic lists PerfectView cameras among accessories. Match connectors and picture mode using both manuals.
What is in the box?
According to the product card: monitor, stand, connection cable, installation mat and manual.
Manufacturer
Dometic Germany GmbH, Hollefeldstrasse 63, 48282 Emsdetten, Germany.