GOK steel cutting ring 8 mm type D, series L (07-151-00) - olive for copper or steel gas pipe
- Original GOK type D cutting ring for 8 mm gas pipe, series L (RVS 8). Hardened, zinc-plated steel, DIN 3861 form A. Replacement for fittings, hoses and valves with an RVS 8 connection.
The GOK type D cutting ring (catalogue no. 07-151-00) is part of a compression joint for 8 mm gas pipe. It is often called an olive or compression ring. It is made of hardened steel, zinc-plated, to DIN 3861 form A. It fits GOK series L fittings with an RVS 8 connection, used in motorhome and caravan gas systems.

Key information
- original GOK type D cutting ring, catalogue no. 07-151-00
- for pipe with 8 mm outside diameter, series L (RVS 8 connection)
- hardened steel, zinc-plated surface
- made to DIN 3861 form A (single-edge cutting ring)
- for steel and copper pipe - use a reinforcing sleeve with copper
- nut not included - fits the GOK M14 x 1.5 nut for 8 mm pipe
Before you order
Slide the nut and the ring onto the pipe. Cut the pipe square at 90 degrees and push it into the fitting up to the stop, otherwise the ring cannot cut into the pipe. When the nut is tightened, the cutting edge of the ring bites into the pipe and raises a visible collar that seals and holds the joint. With copper pipe GOK requires a reinforcing sleeve. Check the joint for leaks after fitting. Follow the GOK instructions and data sheets for cutting ring fittings.
Related products
- GOK steel nut M14 x 1.5 for 8 mm pipe (07-108-00)
- GOK reinforcing sleeve 8 x 1 for 8 mm copper pipe
- GOK cutting ring 8 mm, brass
- GOK straight coupling RVS 8 x RVS 8, type G, series L
- GOK gas hose 1/4 LH-UEM x RVS 8, 400 mm
- GOK gas hose 1/4 LH-UEM x RVS 8, 450 mm
- GOK gas hose 1/4 LH-UEM x RVS 8, 800 mm
- GOK gas hose 1/4 LH-UEM x RVS 8, 1000 mm
- GOK gas hose RVS 8 x RVS 8, 600 mm
- GOK gas hose RVS 8 x RVS 8, 800 mm
- GOK set: regulator 29 mbar 1.5 kg/h and hose RVS 8, 400 mm
- GOK set: regulator 29 mbar with gauge and hose RVS 8, 400 mm
- GOK set: regulator 50 mbar 1.5 kg/h and hose RVS 8, 400 mm
- GOK set: regulator 50 mbar with gauge and hose RVS 8, 400 mm
- GOK set: regulator 30 mbar 0.8 kg/h and hose RVS 8, 400 mm
Technical data
| Parameter | Value |
|---|---|
| Manufacturer | GOK |
| Catalogue no. | 07-151-00 |
| Type | D, series L |
| Pipe | 8 mm outside diameter |
| Connection | RVS 8 |
| Material | hardened steel |
| Surface | zinc-plated |
| Standard | DIN 3861 form A |
| Nut | not included |
Questions and answers
Is the nut included?
No, this is the ring only. The joint needs a nut for 8 mm pipe, for example the GOK M14 x 1.5 nut (07-108-00).
Which pipes does it fit?
Gas pipe with 8 mm outside diameter, steel or copper. Use a reinforcing sleeve with copper pipe.
Does it fit RVS 8 connections in a motorhome?
Yes. It is a series L ring for 8 mm pipe, used in GOK fittings, hoses and valves with an RVS 8 connection.
How is it different from a brass ring?
This ring is made of hardened, zinc-plated steel. GOK also offers an 8 mm brass version.
How do I know the ring is properly tightened?
After tightening the nut, a visible collar should appear on the pipe in front of the ring edge. Then check the joint for leaks.
Manufacturer
GOK Regler- und Armaturen-Gesellschaft mbH & Co. KG, Obernbreiter Straße 2-18, 97340 Marktbreit, Germany.





