GOK reinforcing sleeve type VSH-MS AD 8 x 1, brass - for 8 mm copper pipe in cutting-ring fittings

GOK reinforcing sleeve type VSH-MS AD 8 x 1, brass - for 8 mm copper pipe in cutting-ring fittings

ID produktu: 52434
  • GOK reinforcing sleeve type VSH-MS AD 8 x 1, brass, for pipe with an 8 mm outside diameter and a 1 mm wall. For thin-walled and soft pipes, such as copper, in cutting-ring and clamping-ring fittings.
Add to shopping list
0,45 €
incl. VAT / szt.
Regular price / szt.
You can also buy using:
Product available, ships within 2 business days
14 days for easy returns
Product sold out
You will receive an email notification from us when the product is available again.
Data is processed in accordance with the privacy policy. By submitting data, you accept privacy policy provisions.
Contact details entered above are not used to send newsletters or other advertisements. When you sign up to be notified, you hereby agree to receive only a one-time notification of a product re-availability.
Opis produktu

This brass reinforcing sleeve type VSH-MS from GOK is an insert sleeve according to EN ISO 8434-1. The size AD 8 x 1 means pipe with an outside diameter of 8 mm and a wall thickness of 1 mm. GOK intends it for thin-walled pipes and soft pipe materials, such as copper pipe, in cutting-ring fittings according to EN ISO 8434-1 and in clamping-ring fittings according to EN 12514-4. The sleeve supports the pipe from the inside so that the ring does not crush the thin wall. With copper or aluminium pipe GOK requires a reinforcing sleeve.

Brass GOK reinforcing sleeve type VSH-MS with a knurled collar at one end, on a white background

Key features

  • reinforcing sleeve type VSH-MS, insert sleeve according to EN ISO 8434-1
  • size AD 8 x 1: 8 mm outside pipe diameter, 1 mm wall
  • material: brass
  • for thin-walled and soft pipes, such as copper
  • for cutting-ring fittings according to EN ISO 8434-1
  • also for clamping-ring fittings according to EN 12514-4
  • required by GOK when fitting copper or aluminium pipe

What this sleeve is for

You fit the sleeve into the end of a thin-walled or soft pipe before you assemble a cutting-ring or clamping-ring fitting. The internal support stops the pipe wall from collapsing under the ring. A typical use is 8 x 1 mm copper pipe in the LPG system of a motorhome or caravan, in a fitting such as the straight type G-MS RVS 8 x RVS 8 coupling (straight fitting type G-MS RVS 8 x RVS 8), together with the type M-MS nut (coupling nut type M-MS 8 mm) and the type D-MS ring (cutting ring type D-MS 8 mm).

In Germany, the installation of copper pipes with reinforcing sleeves in an LPG system is permitted only for caravans, recreational vehicles and marine use. Do not assume that this material pairing is allowed outside those uses. In oil-firing systems, according to worksheet DWA-A 791, cutting-ring fittings on pipes that are not steel are permitted only with a reinforcing sleeve.

This is the brass type VSH-MS variant, not the steel type VSH sleeve. For aluminium pipe GOK requires a steel sleeve, not a brass one, because of corrosion. Do not use this sleeve on aluminium.

How it is built and how it works

The sleeve is an insert sleeve: you push it into the pipe from the end. One end has a knurled collar, the knurled rim. When you drive it home, the knurled neck is pressed into the inner wall of the pipe and stops the sleeve from sliding or falling out.

The 8 x 1 mm size refers to the pipe, not to a thread. The sleeve does not replace the cutting ring and does not seal on its own. The seal is made in the fitting once the pipe with the sleeve in place, the ring and the nut are correctly assembled on the cone of the fitting body.

GOK states that cutting-ring fittings must be selected and assembled according to the installation instructions and the fitting data sheets. According to GOK, cutting-ring fittings have a DVGW type-examination certificate to DIN 3387-1.

How to fit it

  1. Work on a gas system only after the pressure has been fully released and in line with the rules that apply. If you are not qualified to do this work, have a competent person fit the joint.
  2. Cut the pipe square. GOK does not allow a pipe cutter or an angle grinder. Lightly deburr the ends inside and outside, then clean them.
  3. Check that the pipe has an 8 mm outside diameter and a 1 mm wall. A different wall thickness does not fit this sleeve.
  4. Push the sleeve into the pipe up to the knurled rim. Drive it fully home with a plastic or rubber hammer so that the knurled neck is pressed into the inner wall of the pipe. Do not use a metal hammer, which could crush the sleeve or the pipe.
  5. Only then slide on the nut and the cutting ring, with the cutting edge facing the pipe end, and assemble the fitting according to the GOK installation instructions. On first assembly tighten the nut by about 1 and 1/2 turns, holding the fitting body with a second spanner.
  6. After assembly, test every joint for tightness as required.

What to watch out for

  • This is a gas-system part and, in the scope given by GOK, can also be used in oil-firing systems. With gas: escaping gas is flammable. If you smell gas or suspect a leak, shut off the gas supply at once.
  • In Germany, copper pipes with reinforcing sleeves in an LPG system are permitted only in caravans, recreational vehicles and on boats.
  • Do not use this brass sleeve on aluminium pipe. GOK then requires a steel sleeve.
  • The sleeve must be driven fully home so that the knurl seats and bites into the pipe. A sleeve that is only pushed in loosely can move and will not support the wall.
  • Undo or tighten fittings only after the pressure has been fully released.

Care

Before assembly, check that the sleeve is not crushed and that the knurl is not damaged. Do not use a damaged sleeve. Store it in a dry place. Do not pull a sleeve back out of a pipe and move it to another pipe. If the pipe end or the sleeve is damaged, recut the pipe and fit a new sleeve.

Technical data

FeatureValue
Typereinforcing sleeve type VSH-MS, insert sleeve
BrandGOK
Size AD8 x 1 mm (outside pipe diameter x wall thickness)
Materialbrass
StandardEN ISO 8434-1
Fittingscutting-ring fittings according to EN ISO 8434-1 and clamping-ring fittings according to EN 12514-4
Typical pipesthin-walled and soft, for example 8 x 1 mm copper pipe
Restriction in Germanycopper pipe with a sleeve in an LPG system only in recreational vehicles, caravans and marine use

Frequently asked questions

Which pipe does this sleeve fit?

Pipe with an 8 mm outside diameter and a 1 mm wall, typically copper pipe. A different wall thickness needs a different type VSH-MS size.

Is the sleeve included with the type G-MS fitting?

No. According to GOK, the straight type G-MS fitting is supplied with a type M-MS nut and a type D-MS ring. You add the sleeve separately when you join copper or aluminium pipe.

Can I use it on aluminium pipe?

No. For aluminium pipe GOK requires a steel reinforcing sleeve, not a brass one.

How is it fitted?

You push the sleeve into the pipe up to the knurled rim and drive it fully home with a plastic or rubber hammer so that the knurl is pressed into the inner wall of the pipe.

May copper pipe with this sleeve be used in a motorhome?

GOK states that in Germany the installation of copper pipes with reinforcing sleeves in an LPG system is permitted only for caravans, recreational vehicles and boats. You must also follow the rules that apply where the vehicle is used.

What is it made of?

Brass. This is the type VSH-MS variant, not the steel type VSH.

Specification
ID produktu
52434
Brand
Do you need help with this product?Ask us, and we'll respond as quickly as possible. We publish interesting questions here to help others.
Ask a question
If this description is not sufficient, please send us a question to this product. We will reply as soon as possible. Data is processed in accordance with the privacy policy. By submitting data, you accept privacy policy provisions.
Write your opinion
Your opinion:
5/5
Add your own product photo:
pixel